Retrieve Magntic flux density data from Ansys maxwell

- February 17, 2020 at 3:10 pm
  
  ranjanpal999
  Subscriber
  
  Hi,
  
  While simulations I did not make the field reports for 'A', 'B', and 'H' data as shown in figure below:
  
  Is there any way out to plot the data after the simulation is over?
  
  Can somebody please reply to this!
- February 18, 2020 at 1:40 pm
  
  Mark Christini
  Ansys Employee
  
  After solving, go to View > Set View Context. Then create the desired plot. Reference Maxwell online help topic: "Setting View Context for Transient Solutions".
  
  If plot is already created, double left click on Time = -1 box in lower left corner of plot window and set to desired "Saved Fields" timestep.
- February 19, 2020 at 2:05 pm
  
  ranjanpal999
  Subscriber
  
  Thanks a lot.
  
  It has worked!