Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › mesh independence study for non-premixed oxy-coal combustion › Reply To: mesh independence study for non-premixed oxy-coal combustion

November 20, 2024 at 5:50 pm
ll00023
Subscriber

mass flux shows that fine mesh case has much lower dpm mass flow rate. it is quite strange.

in order to keep the same setting, I used file/write setting from medium mesh case and then read it to coarse and fine mesh.

 

[bingo_chatbox]