TAGGED: -Ansys-Maxwell-electronics
-
-
September 18, 2024 at 12:30 pm
-
September 18, 2024 at 1:44 pmMirandaHAnsys EmployeeYes, Maxwell allows complex setups involving multiple motions, you may need to ensure that all moving objects are physically separated from stationary objects and that a Band object encloses the moving parts to separate them from the stationary parts of the geometry.
-
September 18, 2024 at 2:55 pmctuncerogluSubscriber
So, for one projectile, can I analyze both how much it rises within the barrel and how much it moves along the barrel at the same time?
-
September 18, 2024 at 2:57 pmctuncerogluSubscriber
Because I need to create a second band inside the barrel to see how much it rises, but in that case, the bands will intersect. If I create two half-cylinder bands inside the barrel, I’m not sure if I can perform both the rise and forward movement analysis for a single object.
-
September 18, 2024 at 6:32 pmMirandaHAnsys Employee
no, bands cannot overlap.
-
September 19, 2024 at 5:33 amctuncerogluSubscriber
can I define two motions without overlapping bands for a single solid object?
-
September 19, 2024 at 2:03 pmMirandaHAnsys Employee
Unfortunately, no, each band does one motion, it could be rotation or translation.
-
September 19, 2024 at 2:38 pmctuncerogluSubscriber
Thank you for your responses and for being patient with my questions.
-
-
-
- You must be logged in to reply to this topic.
- HFSS Incident Plane Wave excitement mode
- Question for Maxwell
- Simulation of capacitor combining eddy currents with displacement currents
- How to calculate eddy and hysteresis losses of the core?
- Ansys Maxwell 3D – eddy current
- How to determine initial position in motion setup
- dq graph non-conformity
- How to customize pulse waveform and injection site in microstrip array
- 180 Degree Phase Shift When Measuring S21
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
-
1191
-
513
-
488
-
225
-
209
© 2024 Copyright ANSYS, Inc. All rights reserved.