We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Ansys AQWA › Reply To: Ansys AQWA

August 1, 2024 at 9:20 am
Mike Pettit
Ansys Employee

Hi Karim,

Quick answer - no, the only way is to extract from Workbench.

More specifically, we do output the undamped natural modes of the freely-floating structure in still water, and you can find these at the bottom of the Hydrodynamic Diffraction LIS file (e.g. project_files\dp0\AQW\AQW\AQ\Analysis\ANALYSIS.LIS). These do not account for the mooring system, though.

The Natural Modes results you find in a Hydrodynamic Diffraction or Hydrodynamic Response Stability Analysis are running their own post-processing calculations to determine the natural modes of the system. Because the added mass and radiation damping are frequency-dependent, we need to scan through a whole range of frequencies to find the natural modes - this is what the 'mode match indicator' graph is showing. This scanning capability only exists in Aqwa Workbench.

I hope this helps!

Mike