Problems with SweepAroundAxis in 2D-Desing (about Z) and function “Create a 3D-D

- July 23, 2024 at 9:08 am
  
  JOM
  Subscriber
  
  Problems with SweepAroundAxis in 2D-Desing (about Z) and function “Create a 3D-Design”.
  Version 2024R1 (also in 2023…)
  I have drawn in 2D (about Z) an object like a washer in the origin of coordinate system and split the object (using plan YX).
  1.       If I did SweepAroundAxis with 360° (sweep axis Z) I get following error:
  
  Maxwell2DDesign1 (Electrostatic, about Z)
      [error] Parasolid Error: Failed in function PK_BODY_make_swept_body_2 with error PK_ERROR_sweep_failed. (09:21:53 AM Jun 07, 2024)
      [error] Body could not be created for part because of invalid parameters to SweepAroundAxis operation. (09:21:53 AM Jun 07, 2024)
  
  2.       If I did SweepAroundAxis with 359° (sweep axis Z) its work but it is not what I like.
  3.       If I did SweepAroundAxis with 360° (sweep axis Z) and set the Number of Segments like 360 it works fine
  But in version 2022R1, I can do case 1 without any Problems.
  If I did it with “Create a 3D-Design.” I have the same errors
  What I did wrong?
- July 31, 2024 at 12:06 pm
  
  Reshmi Raghavan
  Ansys Employee
  
  Hello Jens,
  Please share the snapshot of the 2D model being used.
- July 31, 2024 at 12:50 pm
  
  JOM
  Subscriber
  
  after I split the washer