Can I set TX and RX separately in HFSS SBR+

- July 21, 2024 at 3:35 am
  
  p fey
  Subscriber
  
  Hey, I am simulating a MIMO Imaging scenario in HFSS SBR+. For each excitation, the properties tab shows its "TX/RX Type" is TX/RX. Can I set a specified exciation to be Tx or Rx only?
- July 23, 2024 at 8:20 am
  
  Aymen Mzoughi
  Ansys Employee
  
  You can set antenna type as required for a particular scenario:
- July 24, 2024 at 2:12 am
  
  p fey
  Subscriber
  
  Thank you Aymen！