Reply To: FDTD Model for Interconnect Element

[opz228317]

Thank you, G. Wang for reply.

There is no direct application as such.

I understant you point. Just want to ensure it again. As you mentioned I shall keep my port width large/wide that will capture the exited mode even when the width of waveguide is incresed.

(Point taken)

One more things that yet to be clearify:

Since I want to cotrol/change the width of one of waveguide from Interconnect, not in FDTD. So, how I shall I export my FDTD s-parameter for interconect.

1. Do I need to first sweep the width of that waveguide before extracting s-parameter so that FDTD model can acknowledge the width varriation command from received from Interconnect. If so, does the s-parameter sweep itself capture the width sweep and genetate all the s-parameter corresp[onding to variation of width. 
2. If not, then how the s-parameter shall be exported.

Thank you.