HFSS simulation transmission line with bi-directional TVS s2p file

- May 13, 2024 at 9:30 am
  
  Mike Chiang
  Subscriber
  
  Hi
  I have done a simulation about bi-directional TVS with a transmission line.
  The TVS equaled RC to GND simulation is like the s-parameter which is exactly measured.
  But when I put the s2p file on the TL and the terminal lump port on the TVS side. The result is almost the same as the measured TL.
  Q: Is the simulation method correct? Can the diode can be simulated like this?
  If the TVS simulation can not be simulated, what method I can do?
- May 27, 2024 at 4:43 pm
  
  Aymen Mzoughi
  Ansys Employee
  
  Yes that method should work