Current leak to the air

- January 30, 2024 at 5:00 pm
  
  shashank c
  Subscriber
  
  I am trying to simulate a coil with air core and i keep getting error "current leak to the air".
  I have changed the excitation to current density and current density terminal as per the previous suggestions. I have also modified the mesh settings to classic and assigned the feed to a 2D plane taken from the section of coil.
  Can I please know if anyone figured out the issue?
- January 31, 2024 at 3:19 pm
  
  Reshmi Raghavan
  Ansys Employee
  
  Hello Shashank,
  Could you please share the snapshot of the coil.
- January 31, 2024 at 3:27 pm
  
  shashank c
  Subscriber
  
  Please find below, I have attched the coil. It is just an air core coil made of copper. If I have the feed section inside the coil (As shown in image below) then simulation runs for 2 adaptive passes and gives me "Current leak to air" error But if the feed section is outside the coil, the simulation is terminated immediatly with the same error message.