Learning Forum

[ANSYS EXPLORER]

Dear Experts, Requesting your guidance to fix this error while running subject FE model.

Errors as below:

 *** ERROR ***                           CP =     683.672   TIME= 22:43:19
 The program is unable to open file file.DSPtri.  If the suggestions in 
 the associated error messages immediately preceding and/or following   
 this error message do not help resolve the file issue, please send the 
 data leading to this operation to your technical support provider,     
 along with the I/O error code of 999 and the system error code of 0,   
 for help in determining the possible reasons as to why this file could 
 not be opened. 

 

 

 

 *** ERROR ***                           CP =     683.672   TIME= 22:43:19
 The program is unable to open file file.DSPtri.  Unit 90 is already in 
 use.  Please send the data leading to this operation to your technical 
 support provider, as this will allow ANSYS, Inc to improve the         
 program.

 

 

Regrads

 

 

 

AE

 

[Aniket]

ANSYS WORK BENCH – THERMAL STEADY STATE + STRUCTRUAL ANLYSIS Is this the same question?

-Aniket

Forum Rules & Guidelines

[mrife]

Hi Ansys Explorer

Is the Workbench Project saved to a folder on your MS OneDrive?  If so save it to some other location; OneDrive can have security scanning and backup of files.  Which can impede other programs access to the file.  Alternatively there could be some other security or backup application doing the same.

How much free space is on the storage drive?  It's also possible that the storage drive is running out of space.

Mike

[ANSYS EXPLORER]

Dear Mike / Aniket ,

Thank you for your swift response.

To Mike : I am working in VDI  machine having (128GB RAM + 4 Cores + 100GB additonal storage) remotely. While running model, the solution getting stopped even at 4% growth during structural analysis when free memory space  around 80GB avaiable in machine. Please advise on path-forward.

To Aniket: I have raised questions in this forum per error wise though it is pertaining to same FE model. The error is different in the below question.

ANSYS WORK BENCH – THERMAL STEADY STATE + STRUCTRUAL ANLYSIS

Thank you.

Regards

AE