Silent Install – LicServerInfo Switch Not Working

- October 11, 2023 at 2:56 pm
  
  Douglas Cutshall
  Subscriber
  
  I am using the following command to silent install the software, which is working great. However, when I go to launch the server info is not being imported correctly.
  
  Here is the command I'm using:
  "\\xxxx-shares\SiteSoftware\xxxx\Engineering\Ansys STK\Ansys_STK_Pro_v12.7.1\STK_v12.7.1\install.exe" /s /licenseagree /licserverinfo 2325:1055:xxxx-LIC-SRV
  
  I have tried it like this: /licserverinfo 1055:xxxx-LIC-SRV; xxxx-LIC-SRV:1055 and neither has worked. I have to manually configure the server.
- October 11, 2023 at 3:30 pm
  
  Douglas Cutshall
  Subscriber
  
  I resolved it myself after trying different configs…and this is the one that worked for me:
  ”\\xxxx-shares\SiteSoftware\xxxx\Engineering\Ansys STK\Ansys_STK_Pro_v12.7.1\STK_v12.7.1\install.exe” /s /licenseagree /licserverinfo 1055:xxxx-LIC-SRV
  If you are testing your silent install script, you may want to re-image your machine before implementing a new script as the licserverinfo is stored.
  
  Hope this helps someone in the future.