Learning Forum

[Alexandre Gomes]

Hi,

Could someone help me invert the direction of the load while using SFgrad?

I am trying to apply a triangular pressure on a surface (component called Nmon) but the applied load is in direction +Y, however i would like to invert the direction of the applied load to -Y. The load magnitude varies in the z direction.

I am using the SFgrad command, as follows:

SfGrad

SfGrad, Pres, 0, Z, 634, 1e4 !SfGrad, Lab=Pres, SlKCN=0, SlDir=Z, SlZer=ZAlb, Slope=1.e4 = 10 m/s^2 * 1000 kg/m3

               

AllSel, All, All

     

CmSel, S, NMon

NSel, R, Loc, Z, 500, 634 ! NSel, Type=R, Item=Loc, Comp=Z, Vmin, Vmax, Vinc, kAbs

       

Sf, All, Pres, 0. ! Sf, Nlist=All, Lab=Pres, Value=0., Value2, – , MeshFlag

[Surya Prakash]

Hi Alexandre,

Can you please check this help documentation on the "SFCONTROL" command and see if it helps?

SFCONTROL (ansys.com)

Thanks,
Surya

[mrife]

Hi Alexandre 

Have you tried simply changing the sign of the load and slope?  Mike