*INITIAL_CONTACT_WEAR data is not written in dynain file

- July 20, 2023 at 2:49 pm
  
  Geardyn 1
  Subscriber
  
  hi all,
  I have a gear pair model consisting of solid elements, which is used to simulate wear behaviour.
  we have followed all the steps as mentioned by the following pdf : simulation-of-wear-processes-in-ls-dyna.pdf
  INTFOR is showing the Wear slide & Depth Fringe , but the issue is that inspite of adding the following cards , *INITIAL_CONTACT_WEAR data is not been written in the dynain file.
  Cards used :
  *CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_ID (SPR/MPR are set to 2)
  *CONTACT_ADD_WEAR (above contact cid is added with p1,p2,p3)
  *DATABASE_EXTENT_INTFOR (nwear=2)
  *INTERFACE_SPRINGBACK_LSDYNA (PSID is mentioned).....
  
  thanks in advance.
- July 20, 2023 at 3:13 pm
  
  Geardyn 1
  Subscriber