Learning Forum

[rkgupta369]

Hello,

everyone, i want to form a simulation on DI diesel engine for my course project in my college. For this purpose, i wanted to learn simulation in ANSYS Forte. i got the file in which tutorials steps are given, but file "(demo_eng.x_t and lift.prof)" used in the simulation are available for their licensed customers.

   I am requesting to all license user that if you have 5-10 mins of your time. then please send me this file on my email at

it would hard affect you, but to me it would be a life save

To access tutorials and their input files on the ANSYS Customer Portal, go to
http://support.ansys.com/training.

I would really appreciate any help from this community.

[Garrystone123]

 Hi rkgupta369, did you manage to locate these files? I need them also for the Ansys Forte simulation.

Please send them to if you have them.

Thanks

Garry

[raul.raghav]

The zip file consists of the following input files: 

demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

These files that can help you do the following tutorials:

(1) Solving a Cold Flow Simulation in IC Engine(Fluent) System: demo_eng.x_t , lift.prof

(2) Solving a Port Flow Simulation in IC Engine (Fluent) System: tut_port.x_t

(3) Solving a Gasoline Direct Injection Engine Simulation in IC Engine (Fluent) System: tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

Refer to the following links for tutorials on IC engines:

Ansys How To Videos: ANSYS Internal Combustion Engine (ICE)

Ansys Internal Combustion Engines

Tutorial: Solving a Cold Flow Simulation

The zip file consists of the following input files: 

demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

 

Note: It is against the rules of the community to share tutorial files. The zip file attached herein were downloaded from various websites online and just put together. As a suggestion, provide an email id here and if someone has the files, they can help you with it.

[user deleted]

could I have these zip file please, cuz I'm facing the same problem with my simulation part of my final year project

my email : 2001870023@su.edu.ye

[Mustafa Gerengi]

hi Raul,

 

thnks for the information. I will be so glad if send me the mentioned file to mail mail adress written below

ararat04mustafa@yahoo.com

thnks

[Bidyanka]

Hello Rahul sir. I'm a B.Tech final year student. I'm trying to form a simulation of SI engine in ansys forte and was wondering if the files provided by you in the above attached zip file are going to work in SI engine as the actual post was regarding diesel engine. In case we need different files for SI engine, can you please provide me with those files. Please send the files at >

 

Thank you.

[Inzamam31]

Hello Rahul sir, I am Inzamam Ul Hussain a final year Btech Mechanical student. Where I can find the SI engine full simulation for ansys forte? Please provide me the files or links at. Thank you sir.

[raul.raghav]

Inzamam, you can call me Rahul. Don't have to be formal .

My first post in this discussion has been updated. You can find the tutorials and the corresponding files from the post.

[Inzamam31]

Actually i forgot to mention about the combustion of SI engine. I am not being able to find any files for SI engine combustion simulation for ansys forte. So if you have the files or you can provide me the links, then please send me at e-mail address. Your help is really appreciated.

[Juancito]

Hello Raul, I would need those files. You could send them to me?

Thanks!!

[sridharsahoo366]

Hey are you using ansys Forte for simulating ic engine problems ?

Hello Rahul, do you work in ansys forte. I am working in ansys forte and facing many problems in modelling. 

If you have time we can discuss some of the challenges that m facing. 

please mail me if you do . 

 

[sanusi]

@raul.raghaz please I need support files for the ci engine combustion simulation on fuent I have tried all the files u supplied here but it wasn't working. I specifically need combustion profile file, the chem rxn, therm file. Will very glad if I can get this files as I'm in a critical need of it.

Thank you all for your contributions, assist is not limited to anyone my email is .

regards to all

[raul.raghav]

Unfortunately, its against the rules of the forum to share tutorial files. Additionally, the zip file attached in the post above where files that were downloaded from various websites online.

As a suggestion, you can provide your email id and someone who has the files can help you with it.

[sanusi]

Thank you so much my email is

[sanusi]

Hello every one, hope we all doing great?

I have some challenges in specifying my desired compression ratio for the ci engine simulation, how can I go through this?

 

[sanusi]

Hello guys, please how is it to obtain the emission parameter result from any ic engine simulation?

[Amine Ben Hadj Ali]

Please start a new thread and elaborate more on your question.

[GurkanErtugral]

@raul.raghaz Could you send tutorial files to me ?

(demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Best regards.

[Karthik Remella]

Hello,

Please post your questions in a new thread. You will get more visibility this way. 

Thank you.

Best Regards,

Karthik

[sanusi]

hello, please how do i go about it?

[sanusi]

thank you so much. but how do i go about that?

[Karthik Remella]

Hello Sanusi,

Please create a new thread to ask your question. It will improve the visibility of your question on this community. In addition, please elaborate on the exact nature of challenges you are facing during the compression stroke. Please help us understand your question better.

Thank you for your cooperation.

Best Regards,

Karthik

[Philipadebayo]

Pls if you have the demo files, kindly send to my email

Thank you

[varunreddy]

Hello everyone, nnI am pursuing M.tech in Thermal engineering and trying to do a project regarding IC engines in CFD. Am in tremendous need of the following files. Please let me know so that I could do research on the simulation of IC engines project and produce some good results.My mail address-n nThank you.nnDiesel_1comp_35sp_chem.inpnnDiese_1comp_35sp_therm.datn #thankyou #CFD #thermal #ICEngines #mechanicalengineeringn

[Rob]

Those files are from the R19.2 Help, Fluent in Workbench tutorials and should be available from the Ansys support portal if you have a log in. n

[BELQASSIM ZERGUINE]

 

CAN ANY ONE HELP ME OUT WITH THE ZIP FILE 

MY EMAIL IS/ EMail removed - Rob 

 

[Rob]

Click on Help in Forte, and that should take you to the documentation and tutorials. Sharing of Ansys tutorials etc is going to break the Forum rules (and copyright) so I've removed your email address. 

[mayank shukla]

 

please can you send me the zip file on mail 

 

[Rob]

Please read my previous comment.