We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Multi-step analysis, External pressure in static analysis

- February 20, 2023 at 12:14 pm
  
  nastyashustic
  Subscriber
  
  Question about multi-step analysis.
  I have two import pressures, one acting after the other in static, i.e. I apply one pressure, the geometry deforms from it. Next, a second pressure is applied to the deformed model and I look at the deformation at the end.
  I do 2 load steps simply.
  Please let me know if I'm doing the right thing.
  The pressures come from the CFD calculation. After the first application of pressure, I pass the deformed model to the calculation of aerodynamics, then they give me new pressures and I apply them.
- February 23, 2023 at 2:35 pm
  
  Chandra Sekaran
  Ansys Employee
  
  Hi, is the questions if it is OK to apply 2 different pressures in 2 different load steps? Can you elaborate on the question?

Viewing 1 reply thread

The topic ‘Multi-step analysis, External pressure in static analysis’ is closed to new replies.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK