Transient thermal simulation using moving heat source but only 1 data calculated

- January 26, 2023 at 5:54 am
  
  Chan Hyung Ryu
  Subscriber
  
  Question 1. When using 2 Moving Heat Flux at the same time, only 1 can be used.
  
  It doesn't make any sense. I'm not sure why
  
  Question 2. In addition, errors and warnings appeared in the solution information.
  
  Question 3. I heard that the heat source of the moving heat source is Gaussian, is that correct?
  
  Question 4. Can I put the value of 20mm/s as a -value to reverse the direction of the moving heat source? If not, please tell me how to specify directionality
  
  please tell me as detail as possible
  
  thanks your help
  
  Solver Output
  
  Ansys Mechanical Enterprise Academic Student
  
  *------------------------------------------------------------------*
  | |
  | W E L C O M E T O T H E A N S Y S (R) P R O G R A M |
  | |
  *------------------------------------------------------------------*
  
  ***************************************************************
  * ANSYS MAPDL 2023 R1 LEGAL NOTICES *
  ***************************************************************
  * *
  * Copyright 1971-2023 Ansys, Inc. All rights reserved. *
  * Unauthorized use, distribution or duplication is *
  * prohibited. *
  * *
  * Ansys is a registered trademark of Ansys, Inc. or its *
  * subsidiaries in the United States or other countries. *
  * See the Ansys, Inc. online documentation or the Ansys, Inc. *
  * documentation CD or online help for the complete Legal *
  * Notice. *
  * *
  ***************************************************************
  * *
  * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION *
  * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY *
  * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. *
  * The software products and documentation are furnished by *
  * Ansys, Inc. or its subsidiaries under a software license *
  * agreement that contains provisions concerning *
  * non-disclosure, copying, length and nature of use, *
  * compliance with exporting laws, warranties, disclaimers, *
  * limitations of liability, and remedies, and other *
  * provisions. The software products and documentation may be *
  * used, disclosed, transferred, or copied only in accordance *
  * with the terms and conditions of that software license *
  * agreement. *
  * *
  * Ansys, Inc. is a UL registered *
  * ISO 9001:2015 company. *
  * *
  ***************************************************************
  * *
  * This product is subject to U.S. laws governing export and *
  * re-export. *
  * *
  * For U.S. Government users, except as specifically granted *
  * by the Ansys, Inc. software license agreement, the use, *
  * duplication, or disclosure by the United States Government *
  * is subject to restrictions stated in the Ansys, Inc. *
  * software license agreement and FAR 12.212 (for non-DOD *
  * licenses). *
  * *
  ***************************************************************
  2023 R1
  
  Point Releases and Patches installed:
  
  Discovery 2023 R1
  Autodyn 2023 R1
  SpaceClaim 2023 R1
  CFX (includes CFD-Post) 2023 R1
  Chemkin 2023 R1
  EnSight 2023 R1
  FENSAP-ICE 2023 R1
  Fluent (includes CFD-Post) 2023 R1
  Polyflow (includes CFD-Post) 2023 R1
  Forte (includes EnSight) 2023 R1
  TurboGrid 2023 R1
  Aqwa 2023 R1
  Speos 2023 R1
  Mechanical Products 2023 R1
  Material Calibration App 2023 R1
  ACIS Geometry Interface 2023 R1
  AutoCAD Geometry Interface 2023 R1
  Catia, Version 4 Geometry Interface 2023 R1
  Catia, Version 5 Geometry Interface 2023 R1
  Catia, Version 6 Geometry Interface 2023 R1
  Creo Elements/Direct Modeling Geometry Interface 2023 R1
  Creo Parametric Geometry Interface 2023 R1
  Inventor Geometry Interface 2023 R1
  JTOpen Geometry Interface 2023 R1
  NX Geometry Interface 2023 R1
  Parasolid Geometry Interface 2023 R1
  Solid Edge Geometry Interface 2023 R1
  SOLIDWORKS Geometry Interface 2023 R1
  Academic Student 2023 R1
  
  ***** MAPDL COMMAND LINE ARGUMENTS *****
  BATCH MODE REQUESTED (-b) = NOLIST
  INPUT FILE COPY MODE (-c) = COPY
  DISTRIBUTED MEMORY PARALLEL REQUESTED
  4 PARALLEL PROCESSES REQUESTED WITH SINGLE THREAD PER PROCESS
  TOTAL OF 4 CORES REQUESTED
  INPUT FILE NAME = C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B\dummy.dat
  OUTPUT FILE NAME = C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B\solve.out
  START-UP FILE MODE = NOREAD
  STOP FILE MODE = NOREAD
  RELEASE= 2023 R1 BUILD= 23.1 UP20221128 VERSION=WINDOWS x64
  CURRENT JOBNAME=file0 14:13:59 JAN 26, 2023 CP= 0.047
  
  PARAMETER _DS_PROGRESS = 999.0000000
  /INPUT FILE= ds.dat LINE= 0
  
  *** NOTE *** CP = 0.109 TIME= 14:14:00
  The /CONFIG,NOELDB command is not valid in a distributed memory
  parallel solution. Command is ignored.
  *GET _WALLSTRT FROM ACTI ITEM=TIME WALL VALUE= 14.2333333
  TITLE=
  wbnew--Transient Thermal (A5)
  ACT Extensions:
  MovingHeat, 4.1
  dc7b91d1-0fd6-439f-811e-316ced903703, wbex
  /COM, LSDYNA, 2023.1
  5f463412-bd3e-484b-87e7-cbc0a665e474, wbex
  /COM, ANSYSMotion, 2023.1
  20180725-3f81-49eb-9f31-41364844c769, wbex
  
  SET PARAMETER DIMENSIONS ON _WB_PROJECTSCRATCH_DIR
  TYPE=STRI DIMENSIONS= 248 1 1
  PARAMETER _WB_PROJECTSCRATCH_DIR(1) = C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B\
  SET PARAMETER DIMENSIONS ON _WB_SOLVERFILES_DIR
  TYPE=STRI DIMENSIONS= 248 1 1
  PARAMETER _WB_SOLVERFILES_DIR(1) = C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\wbnew_files\dp0\SYS\MECH\
  SET PARAMETER DIMENSIONS ON _WB_USERFILES_DIR
  TYPE=STRI DIMENSIONS= 248 1 1
  PARAMETER _WB_USERFILES_DIR(1) = C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\wbnew_files\user_files\
  --- Data in consistent NMM units. See Solving Units in the help system for more
  MPA UNITS SPECIFIED FOR INTERNAL
  LENGTH = MILLIMETERS (mm)
  MASS = TONNE (Mg)
  TIME = SECONDS (sec)
  TEMPERATURE = CELSIUS (C)
  TOFFSET = 273.0
  FORCE = NEWTON (N)
  HEAT = MILLIJOULES (mJ)
  INPUT UNITS ARE ALSO SET TO MPA
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:00 JAN 26, 2023 CP= 0.141
  wbnew--Transient Thermal (A5)
  
  ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
  *********** Nodes for the whole assembly ***********
  *********** Elements for Body 1 "SYS\Solid" ***********
  *********** Send User Defined Coordinate System(s) ***********
  *********** Send Materials ***********
  *********** Create "Convection" ***********
  ***************** Define Uniform Initial temperature ***************
  
  ***** ROUTINE COMPLETED ***** CP = 0.203
  
  --- Number of total nodes = 24107
  --- Number of contact elements = 4980
  --- Number of spring elements = 0
  --- Number of bearing elements = 0
  --- Number of solid elements = 14212
  --- Number of condensed parts = 0
  --- Number of total elements = 19192
  *GET _WALLBSOL FROM ACTI ITEM=TIME WALL VALUE= 14.2333333
  ****************************************************************************
  ************************* SOLUTION ********************************
  ****************************************************************************
  ***** MAPDL SOLUTION ROUTINE *****
  
  PERFORM A TRANSIENT ANALYSIS
  THIS WILL BE A NEW ANALYSIS
  STEP BOUNDARY CONDITION KEY= 1
  CONTACT INFORMATION PRINTOUT LEVEL 1
  DO NOT SAVE ANY RESTART FILES AT ALL
  DO NOT COMBINE ELEMENT MATRIX FILES (.emat) AFTER DISTRIBUTED PARALLEL SOLUTION
  DO NOT COMBINE ELEMENT SAVE DATA FILES (.esav) AFTER DISTRIBUTED PARALLEL SOLUTION
  Use Quasi-Linear Thermal Transient Solution
  Tolerance for Reform of Thermal Matrix= 0.050
  ***** Fast Property Table Information *****
  Number of entries per property= 64
  Minimum temperature = 0.00
  Maximum temperature = 1000.00
  Enable multipass algorithm
  *** WARNING *** CP = 0.203 TIME= 14:14:00
  Temperature-dependent properties have not been specified. The
  THOPT,QUASI option does not perform equilibrium iterations. Small
  time steps may be required to obtain accurate results.
  NLHIST: ADDED NODAL RESULTS HISTORY FOR:
  NAME = MAX_TEMP
  ITEM/COMP = TEMPMAX
  NODE = 0
  NLHIST: ADDED NODAL RESULTS HISTORY FOR:
  NAME = MIN_TEMP
  ITEM/COMP = TEMPMIN
  NODE = 0
  ********* Initial Time Increment Check And Fourier Modulus *********
  Specified Initial Time Increment: 0.1
  Estimated Increment Needed, le*le/alpha, Body 1: 0.0131295
  ****************************************************
  ******************* SOLVE FOR LS 1 OF 1 ****************
  SELECT FOR ITEM=TYPE COMPONENT=
  IN RANGE 2 TO 2 STEP 1
  4980 ELEMENTS (OF 19192 DEFINED) SELECTED BY ESEL COMMAND.
  SELECT ALL NODES HAVING ANY ELEMENT IN ELEMENT SET.
  9962 NODES (OF 24107 DEFINED) SELECTED FROM
  4980 SELECTED ELEMENTS BY NSLE COMMAND.
  GENERATE SURFACE LOAD CONV ON SURFACE DEFINED BY ALL SELECTED NODES
  VALUES=_CONVVARI35 22.0000000
  NUMBER OF CONV ELEMENT FACE LOADS STORED = 4980
  ALL SELECT FOR ITEM=NODE COMPONENT=
  IN RANGE 1 TO 24107 STEP 1
  24107 NODES (OF 24107 DEFINED) SELECTED BY NSEL COMMAND.
  ALL SELECT FOR ITEM=ELEM COMPONENT=
  IN RANGE 1 TO 24172 STEP 1
  19192 ELEMENTS (OF 19192 DEFINED) SELECTED BY ESEL COMMAND.
  PRINTOUT RESUMED BY /GOP
  USE AUTOMATIC TIME STEPPING THIS LOAD STEP
  USE INITIAL TIME STEP SIZE OF 0.1000000 FOR ALL DEGREES OF FREEDOM
  FOR AUTOMATIC TIME STEPPING:
  USE 0.1000000E-01 AS THE MINIMUM TIME STEP SIZE
  USE 0.1000000 AS THE MAXIMUM TIME STEP SIZE
  TIME= 4.0000
  INCLUDE TRANSIENT EFFECTS FOR ALL DEGREES OF FREEDOM THIS LOAD STEP
  ERASE THE CURRENT DATABASE OUTPUT CONTROL TABLE.
  
  WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF NONE
  FOR ALL APPLICABLE ENTITIES
  WRITE NSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  WRITE RSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  WRITE EANG ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  WRITE VENG ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  WRITE FFLU ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  WRITE CONT ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR ALL APPLICABLE ENTITIES
  PRINTOUT RESUMED BY /GOP
  WRITE MISC ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
  FOR THE ENTITIES DEFINED BY COMPONENT _ELMISC
  CONVERGENCE ON HEAT BASED ON THE NORM OF THE N-R LOAD
  WITH A TOLERANCE OF 0.1000E-02 AND A MINIMUM REFERENCE VALUE OF 0.1000E-02
  USING THE L2 NORM (CHECK THE SRSS VALUE)
  
  *********** Moving Heat Flux: Moving Heat Flux ***********
  
  FINISH SOLUTION PROCESSING
  
  ***** ROUTINE COMPLETED ***** CP = 0.219
  
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:00 JAN 26, 2023 CP= 0.219
  wbnew--Transient Thermal (A5)
  
  ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
  CMBLOCK read of NODE component FACE1 completed
  CMBLOCK read of NODE component PATH1 completed
  CMBLOCK read of NODE component START1 completed
  You have already entered the general preprocessor (PREP7).
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  PARAMETER INX = 1.000000000
  PARAMETER LSTP = 200.0000000
  PARAMETER VEL = 20.00000000
  PARAMETER SEG = 201.0000000
  PARAMETER R1 = 1.600000000
  PARAMETER LD = 156250.0000
  PARAMETER TM_L = 2.000000000
  PARAMETER TM_S = 0.000000000
  PARAMETER FP = Yes
  *IF FP ( = Yes ) EQ
  Yes ( = Yes ) THEN
  OPENED FILE= INDEX1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= VELOCITY1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= LSTP1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= CON1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= LD1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= TMST1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  OPENED FILE= TMLT1.TXT FOR COMMAND FILE DATA
  
  COMMAND FILE CLOSED
  
  *ELSEIF FP ( = Yes ) EQ
  No ( = No ) THEN
  *ELSE
  *ENDIF
  PARAMETER NLINE = 1.000000
  SET PARAMETER DIMENSIONS ON INDEX TYPE=ARRA DIMENSIONS= 1 1 1
  SET PARAMETER DIMENSIONS ON VELOCITY TYPE=ARRA DIMENSIONS= 1 1 1
  SET PARAMETER DIMENSIONS ON LSTP TYPE=ARRA DIMENSIONS= 1 1 1
  *** WARNING *** CP = 0.219 TIME= 14:14:00
  Parameter LSTP already exists. It is deleted and redefined by the *DIM
  command.
  SET PARAMETER DIMENSIONS ON R1 TYPE=ARRA DIMENSIONS= 1 1 1
  *** WARNING *** CP = 0.219 TIME= 14:14:00
  Parameter R1 already exists. It is deleted and redefined by the *DIM
  command.
  SET PARAMETER DIMENSIONS ON LD TYPE=ARRA DIMENSIONS= 1 1 1
  *** WARNING *** CP = 0.219 TIME= 14:14:00
  Parameter LD already exists. It is deleted and redefined by the *DIM
  command.
  SET PARAMETER DIMENSIONS ON TMST TYPE=ARRA DIMENSIONS= 1 1 1
  SET PARAMETER DIMENSIONS ON TMLT TYPE=ARRA DIMENSIONS= 1 1 1
  VECTOR READ OPERATION *VREAD
  INDEX READ FROM FILE INDEX1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f3.0)
  VECTOR READ OPERATION *VREAD
  VELOCITY READ FROM FILE VELOCITY1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f10.5)
  VECTOR READ OPERATION *VREAD
  LSTP READ FROM FILE LSTP1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f3.0)
  VECTOR READ OPERATION *VREAD
  R1 READ FROM FILE CON1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f10.5)
  VECTOR READ OPERATION *VREAD
  LD READ FROM FILE LD1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f30.3)
  VECTOR READ OPERATION *VREAD
  TMST READ FROM FILE TMST1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f10.5)
  VECTOR READ OPERATION *VREAD
  TMLT READ FROM FILE TMLT1.TXT
  VECTOR LENGTH= 1
  LOOP DIRECTIONS=IJK COUNTS= 1 1 1
  FORMAT=(f10.5)
  *DO LOOP ON PARAMETER= INC1 FROM 1.0000 TO 1.0000 BY 1.0000
  *IF INC1 ( = 1.00000 ) EQ
  1 ( = 1.00000 ) THEN
  SELECT COMPONENT FACE1
  *ELSE
  *ENDIF
  *ENDDO INDEX= INC1
  DEFINITION OF COMPONENT = FACE ENTITY=NODE
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  *DO LOOP ON PARAMETER= INC1 FROM 1.0000 TO 1.0000 BY 1.0000
  SELECT COMPONENT PATH1
  *GET PT_ND1 FROM NODE ITEM=COUN VALUE= 81.0000000
  SET PARAMETER DIMENSIONS ON N_PT1 TYPE=ARRA DIMENSIONS= 81 1 1
  SET PARAMETER DIMENSIONS ON X_PT1 TYPE=ARRA DIMENSIONS= 81 1 1
  SET PARAMETER DIMENSIONS ON Y_PT1 TYPE=ARRA DIMENSIONS= 81 1 1
  SET PARAMETER DIMENSIONS ON Z_PT1 TYPE=ARRA DIMENSIONS= 81 1 1
  SET PARAMETER DIMENSIONS ON PT_LEN1 TYPE=ARRA DIMENSIONS= 81 1 1
  SELECT COMPONENT START1
  *GET ND1 FROM NODE ITEM=NUM MIN VALUE= 286.000000
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  SELECT COMPONENT PATH1
  PARAMETER PT_LEN1(1,1) = 0.000000000
  *DO LOOP ON PARAMETER= INC2 FROM 1.0000 TO 81.000 BY 1.0000
  PARAMETER N_PT1(INC2,1) = 286.0000000
  PARAMETER X_PT1(INC2,1) = 5.000000000
  PARAMETER Y_PT1(INC2,1) = 0.000000000
  PARAMETER Z_PT1(INC2,1) = -10.00000000
  PARAMETER ND2 = 5488.000000
  *IF INC2 ( = 1.00000 ) NE
  PT_ND%INDEX(INC1,1)% ( = 81.0000 ) THEN
  PARAMETER PT_LEN1(INC2+1,1) = 0.5000000000
  *ENDIF
  UNSELECT FOR ITEM=NODE COMPONENT=
  IN RANGE 286 TO 286 STEP 1
  80 NODES (OF 24107 DEFINED) SELECTED BY NSEL COMMAND.
  PARAMETER ND1 = 5488.000000
  *ENDDO INDEX= INC2
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  PARAMETER TOT_LEN1 = 40.00000000
  PARAMETER VEL_M1 = 20.00000000
  *ENDDO INDEX= INC1
  VECTOR PARAMETER OPERATION *VSCFUN
  MAX_T = MAX TMLT
  VECTOR LENGTH= 1
  RESULT= 2.0000
  VECTOR PARAMETER OPERATION *VSCFUN
  MIN_T = MIN TMST
  VECTOR LENGTH= 1
  RESULT= 0.0000
  PARAMETER DT = 0.1000000000E-01
  SET PARAMETER DIMENSIONS ON T_NR TYPE=ARRA DIMENSIONS= 201 1 1
  SET PARAMETER DIMENSIONS ON P1 TYPE=ARRA DIMENSIONS= 201 1 1
  VECTOR FILL OPERATION *VFILL
  T_NR = RAMP
  VECTOR LENGTH= 201
  INITIAL VALUE= 0.0000 STEP INCREMENT= 0.10000E-01
  *DO LOOP ON PARAMETER= INC1 FROM 1.0000 TO 1.0000 BY 1.0000
  PARAMETER TM_S = 0.000000000
  VECTOR PARAMETER OPERATION *VOPER
  P1 = T_NR GE TM_S
  VECTOR LENGTH= 201
  VECTOR PARAMETER OPERATION *VSCFUN
  TS1 = FIRS P1
  VECTOR LENGTH= 201
  RESULT= 1.0000
  PARAMETER TM_E = 2.000000000
  VECTOR PARAMETER OPERATION *VOPER
  P1 = T_NR GE TM_E
  VECTOR LENGTH= 201
  VECTOR PARAMETER OPERATION *VSCFUN
  TE1 = FIRS P1
  VECTOR LENGTH= 201
  RESULT= 201.00
  PARAMETER STATUS- TS1 ( 57 PARAMETERS DEFINED)
  (INCLUDING 22 INTERNAL PARAMETERS)
  NAME VALUE TYPE DIMENSIONS
  TS1 1.00000000 SCALAR
  PARAMETER STATUS- TE1 ( 57 PARAMETERS DEFINED)
  (INCLUDING 22 INTERNAL PARAMETERS)
  NAME VALUE TYPE DIMENSIONS
  TE1 201.000000 SCALAR
  *ENDDO INDEX= INC1
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  *GET NDT FROM NODE ITEM=COUN VALUE= 24107.0000
  SET PARAMETER DIMENSIONS ON VARY_LD TYPE=ARRA DIMENSIONS= 24107 1 1
  SET PARAMETER DIMENSIONS ON X_LOC TYPE=ARRA DIMENSIONS= 24107 1 1
  SET PARAMETER DIMENSIONS ON Y_LOC TYPE=ARRA DIMENSIONS= 24107 1 1
  SET PARAMETER DIMENSIONS ON Z_LOC TYPE=ARRA DIMENSIONS= 24107 1 1
  VECTOR GET OPERATION X_LOC VECTOR LENGTH= 24107
  NAME= NODE 0 LOC X
  VECTOR GET OPERATION Y_LOC VECTOR LENGTH= 24107
  NAME= NODE 0 LOC Y
  VECTOR GET OPERATION Z_LOC VECTOR LENGTH= 24107
  NAME= NODE 0 LOC Z
  *DO LOOP ON PARAMETER= INC1 FROM 1.0000 TO 1.0000 BY 1.0000
  SELECT COMPONENT FACE1
  VECTOR GET OPERATION NMASK VECTOR LENGTH= 24107
  NAME= NODE 0 NSEL
  VECTOR PARAMETER OPERATION *VOPER
  NMASK_1 = NMASK ADD 1
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  NMASK1 = NMASK_1 DIV 2
  VECTOR LENGTH= 24107
  *ENDDO INDEX= INC1
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  *GET MAX_TYP FROM ETYP ITEM=NUM MAX VALUE= 2.00000000
  *GET MAX_MAT FROM MAT ITEM=NUM MAX VALUE= 1.00000000
  *GET MAX_RL FROM RCON ITEM=NUM MAX VALUE= 0.788860905E-30
  ELEMENT TYPE 3 IS SURF152 3-D THERMAL SURFACE
  KEYOPT( 1- 6)= 0 0 0 0 0 0
  KEYOPT( 7-12)= 0 0 0 0 0 0
  KEYOPT(13-18)= 0 0 0 0 0 0
  CURRENT NODAL DOF SET IS TEMP
  THREE-DIMENSIONAL MODEL
  ELEMENT TYPE 3 IS SURF152 3-D THERMAL SURFACE
  KEYOPT( 1- 6)= 0 0 0 0 0 0
  KEYOPT( 7-12)= 0 1 0 0 0 0
  KEYOPT(13-18)= 0 0 0 0 0 0
  CURRENT NODAL DOF SET IS TEMP
  THREE-DIMENSIONAL MODEL
  ELEMENT TYPE SET TO 3
  MATERIAL NUMBER SET TO 2
  REAL CONSTANT NUMBER= 1
  SELECT COMPONENT FACE
  GENERATE ELEMENTS ON SURFACE DEFINED BY SELECTED NODES
  TYPE= 3 REAL= 1 MATERIAL= 2 ESYS= 0
  NUMBER OF ELEMENTS GENERATED= 2204
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  PARAMETER EXT = 0.000000
  *IF EXT ( = 0.00000 ) EQ
  1 ( = 1.00000 ) THEN
  *ENDIF
  PARAMETER EXT = 0.000000
  *IF EXT ( = 0.00000 ) EQ
  1 ( = 1.00000 ) THEN
  *ENDIF
  
  ***** ROUTINE COMPLETED ***** CP = 0.250
  
  ***** MAPDL SOLUTION ROUTINE *****
  *DO LOOP ON PARAMETER= INC1 FROM 1.0000 TO 201.00 BY 1.0000
  *DO LOOP ON PARAMETER= INC2 FROM 1.0000 TO 1.0000 BY 1.0000
  *IF INC1 ( = 1.00000 ) GE
  TS%INDEX(INC2,1)% ( = 1.00000 )
  ***** AND *****
  INC1 ( = 1.00000 ) LE
  TE%INDEX(INC2,1)% ( = 201.000 ) THEN
  PARAMETER DIST_11 = 0.000000000
  PARAMETER DIST_21 = 0.000000000
  PARAMETER DIST1 = 0.000000000
  VECTOR PARAMETER OPERATION *VOPER
  LOC11 = PT_LEN1 GE DIST1
  VECTOR LENGTH= 81
  VECTOR PARAMETER OPERATION *VSCFUN
  LOC21 = FIRS LOC11
  VECTOR LENGTH= 81
  RESULT= 1.0000
  PARAMETER LOC31 = 0.000000000
  PARAMETER A0 = 81.00000000
  *IF INC1 ( = 1.00000 ) EQ
  TS%INDEX(INC2,1)% ( = 1.00000 ) THEN
  PARAMETER A = 5.000000000
  PARAMETER B = 0.000000000
  PARAMETER C = -10.00000000
  *ELSEIF INC1 ( = 1.00000 ) EQ
  TE%INDEX(INC2,1)% ( = 201.000 ) THEN
  *ELSE
  *ENDIF
  VECTOR PARAMETER OPERATION *VOPER
  A1 = X_LOC SUB A
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  B1 = Y_LOC SUB B
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  C1 = Z_LOC SUB C
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  A2 = A1 MULT A1
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  B2 = B1 MULT B1
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  C2 = C1 MULT C1
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  A3 = A2 ADD B2
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  B3 = A3 ADD C2
  VECTOR LENGTH= 24107
  PARAMETER R2 = -2.560000000
  VECTOR PARAMETER OPERATION *VOPER
  A4 = B3 DIV R2
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VFUN
  B4 = EXP A4
  VECTOR LENGTH= 24107
  PARAMETER AA1 = 156250.0000
  VECTOR PARAMETER OPERATION *VOPER
  L_D1 = AA1 MULT B4
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  VARY_LD1 = L_D1 MULT NMASK1
  VECTOR LENGTH= 24107
  VECTOR PARAMETER OPERATION *VOPER
  VARY_LD = VARY_LD ADD VARY_LD1
  VECTOR LENGTH= 24107
  *ENDIF
  *ENDDO INDEX= INC2
  USE THE VECTOR VARY_LD AS SURFACE LOAD FUNCTION
  SELECT FOR ITEM=TYPE COMPONENT=
  IN RANGE 3 TO 3 STEP 1
  2204 ELEMENTS (OF 21396 DEFINED) SELECTED BY ESEL COMMAND.
  SPECIFIED SURFACE LOAD HFLU FOR ALL SELECTED ELEMENTS LKEY = 1
  VALUES = 0.0000 0.0000 0.0000 0.0000
  PARAMETER TM = 0.1000000000E-01
  TIME= 0.10000E-01
  USE 1 SUBSTEP(S) THIS LOAD STEP FOR ALL DEGREES OF FREEDOM
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  *** NOTE *** CP = 0.359 TIME= 14:14:00
  The automatic domain decomposition logic has selected the MESH domain
  decomposition method with 4 processes per solution.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 0.359 TIME= 14:14:00
  Element shape checking is currently inactive. Issue SHPP,ON or
  SHPP,WARN to reactivate, if desired.
  *** NOTE *** CP = 0.359 TIME= 14:14:00
  The model data was checked and warning messages were found.
  Please review output or errors file (
  C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE
  E60B\file0.err ) for these warning messages.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:00 JAN 26, 2023 CP= 0.375
  wbnew--Transient Thermal (A5)
  
  S O L U T I O N O P T I O N S
  PROBLEM DIMENSIONALITY. . . . . . . . . . . . .3-D
  DEGREES OF FREEDOM. . . . . . TEMP
  ANALYSIS TYPE . . . . . . . . . . . . . . . . .TRANSIENT
  SOLUTION METHOD. . . . . . . . . . . . . . .QUASI
  OFFSET TEMPERATURE FROM ABSOLUTE ZERO . . . . . 273.15
  NEWTON-RAPHSON OPTION . . . . . . . . . . . . .PROGRAM CHOSEN
  GLOBALLY ASSEMBLED MATRIX . . . . . . . . . . .SYMMETRIC
  *** WARNING *** CP = 0.375 TIME= 14:14:00
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** NOTE *** CP = 0.391 TIME= 14:14:00
  The step data was checked and warning messages were found.
  Please review output or errors file (
  C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE
  E60B\file0.err ) for these warning messages.
  *** NOTE *** CP = 0.391 TIME= 14:14:00
  The conditions for direct assembly have been met. No .emat or .erot
  files will be produced.
  
  
  D I S T R I B U T E D D O M A I N D E C O M P O S E R
  
  ...Number of elements: 21396
  ...Number of nodes: 24107
  ...Decompose to 4 CPU domains
  ...Element load balance ratio = 1.005
  
  L O A D S T E P O P T I O N S
  LOAD STEP NUMBER. . . . . . . . . . . . . . . . 1
  TIME AT END OF THE LOAD STEP. . . . . . . . . . 0.10000E-01
  AUTOMATIC TIME STEPPING . . . . . . . . . . . . ON
  INITIAL NUMBER OF SUBSTEPS . . . . . . . . . 1
  MAXIMUM NUMBER OF SUBSTEPS . . . . . . . . . 1
  MINIMUM NUMBER OF SUBSTEPS . . . . . . . . . 1
  MAXIMUM NUMBER OF EQUILIBRIUM ITERATIONS. . . . 15
  STEP CHANGE BOUNDARY CONDITIONS . . . . . . . . YES
  TRANSIENT (INERTIA) EFFECTS
  THERMAL DOFS . . . . . . . . . . . . . . . . ON
  TRANSIENT INTEGRATION PARAMETERS
  THETA. . . . . . . . . . . . . . . . . . . . 1.0000
  OSCILLATION LIMIT CRITERION. . . . . . . . . 0.50000
  TOLERANCE. . . . . . . . . . . . . . . . . . 0.0000
  TERMINATE ANALYSIS IF NOT CONVERGED . . . . . .YES (EXIT)
  CONVERGENCE CONTROLS
  LABEL REFERENCE TOLERANCE NORM MINREF
  HEAT 0.000 0.1000E-02 2 0.1000E-02
  PRINT OUTPUT CONTROLS . . . . . . . . . . . . .NO PRINTOUT
  DATABASE OUTPUT CONTROLS
  ITEM FREQUENCY COMPONENT
  ALL NONE
  NSOL ALL
  RSOL ALL
  EANG ALL
  VENG ALL
  FFLU ALL
  CONT ALL
  MISC ALL _ELMISC
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  
  **** CENTER OF MASS, MASS, AND MASS MOMENTS OF INERTIA ****
  CALCULATIONS ASSUME ELEMENT MASS AT ELEMENT CENTROID
  TOTAL MASS = 0.12560E-04
  MOM. OF INERTIA MOM. OF INERTIA
  CENTER OF MASS ABOUT ORIGIN ABOUT CENTER OF MASS
  XC = 25.000 IXX = 0.1685E-02 IXX = 0.4206E-03
  YC = -0.80000 IYY = 0.1214E-01 IYY = 0.3035E-02
  ZC = -10.000 IZZ = 0.1048E-01 IZZ = 0.2619E-02
  IXY = 0.2512E-03 IXY = -0.4186E-09
  IYZ = -0.1005E-03 IYZ = 0.5883E-09
  IZX = 0.3140E-02 IZX = 0.8833E-10
  
  *** MASS SUMMARY BY ELEMENT TYPE ***
  TYPE MASS
  1 0.125600E-04
  Range of element maximum matrix coefficients in global coordinates
  Maximum = 132.12988 at element 5428.
  Minimum = 1.840801884E-04 at element 21534.
  *** ELEMENT MATRIX FORMULATION TIMES
  TYPE NUMBER ENAME TOTAL CP AVE CP
  1 14212 SOLID291 0.203 0.000014
  2 4980 SURF152 0.047 0.000009
  3 2204 SURF152 0.016 0.000007
  Time at end of element matrix formulation CP = 0.59375.
  DISTRIBUTED SPARSE MATRIX DIRECT SOLVER.
  Number of equations = 24107, Maximum wavefront = 76
  Process memory allocated for solver = 13.268 MB
  Process memory required for in-core solution = 12.741 MB
  Process memory required for out-of-core solution = 6.643 MB
  Total memory allocated for solver = 52.041 MB
  Total memory required for in-core solution = 49.966 MB
  Total memory required for out-of-core solution = 25.768 MB
  *** NOTE *** CP = 0.719 TIME= 14:14:00
  The Distributed Sparse Matrix Solver is currently running in the
  in-core memory mode. This memory mode uses the most amount of memory
  in order to avoid using the hard drive as much as possible, which most
  often results in the fastest solution time. This mode is recommended
  if enough physical memory is present to accommodate all of the solver
  data.
  Distributed sparse solver maximum pivot= 278.345736 at node 11754 TEMP.
  Distributed sparse solver minimum pivot= 21.1551413 at node 146 TEMP.
  Distributed sparse solver minimum pivot in absolute value= 21.1551413
  at node 146 TEMP.
  *** ELEMENT RESULT CALCULATION TIMES
  TYPE NUMBER ENAME TOTAL CP AVE CP
  1 14212 SOLID291 0.156 0.000011
  2 4980 SURF152 0.062 0.000013
  3 2204 SURF152 0.000 0.000000
  *** NODAL LOAD CALCULATION TIMES
  TYPE NUMBER ENAME TOTAL CP AVE CP
  1 14212 SOLID291 0.141 0.000010
  2 4980 SURF152 0.016 0.000003
  3 2204 SURF152 0.000 0.000000
  *** LOAD STEP 1 SUBSTEP 1 COMPLETED. CUM ITER = 1
  *** TIME = 0.100000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 117.5 OSCILLATION LIMIT = 1.175
  
  *** MAPDL BINARY FILE STATISTICS
  BUFFER SIZE USED= 16384
  0.500 MB WRITTEN ON ELEMENT SAVED DATA FILE: file0.esav
  1.875 MB WRITTEN ON ASSEMBLED MATRIX FILE: file0.full
  2.250 MB WRITTEN ON RESULTS FILE: file0.rth
  SET PARAMETER DIMENSIONS ON VARY_LD TYPE=ARRA DIMENSIONS= 24107 1 1
  *** WARNING *** CP = 0.953 TIME= 14:14:01
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  *ENDDO INDEX= INC1
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 1.047 TIME= 14:14:01
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:01 JAN 26, 2023 CP= 1.094
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 2 SUBSTEP 1 COMPLETED. CUM ITER = 2
  *** TIME = 0.200000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 29.51 OSCILLATION LIMIT = 0.2951
  *** WARNING *** CP = 1.406 TIME= 14:14:01
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 1.453 TIME= 14:14:01
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:01 JAN 26, 2023 CP= 1.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 3 SUBSTEP 1 COMPLETED. CUM ITER = 3
  *** TIME = 0.300000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.84 OSCILLATION LIMIT = 0.1884
  *** WARNING *** CP = 1.828 TIME= 14:14:02
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 1.875 TIME= 14:14:02
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:02 JAN 26, 2023 CP= 1.922
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 4 SUBSTEP 1 COMPLETED. CUM ITER = 4
  *** TIME = 0.400000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 16.03 OSCILLATION LIMIT = 0.1603
  *** WARNING *** CP = 2.234 TIME= 14:14:02
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 2.281 TIME= 14:14:02
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:02 JAN 26, 2023 CP= 2.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 5 SUBSTEP 1 COMPLETED. CUM ITER = 5
  *** TIME = 0.500000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 15.86 OSCILLATION LIMIT = 0.1586
  *** WARNING *** CP = 2.656 TIME= 14:14:03
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 2.703 TIME= 14:14:03
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:03 JAN 26, 2023 CP= 2.766
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 6 SUBSTEP 1 COMPLETED. CUM ITER = 6
  *** TIME = 0.600000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 16.58 OSCILLATION LIMIT = 0.1658
  *** WARNING *** CP = 3.078 TIME= 14:14:03
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 3.141 TIME= 14:14:03
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:03 JAN 26, 2023 CP= 3.188
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 7 SUBSTEP 1 COMPLETED. CUM ITER = 7
  *** TIME = 0.700000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.53 OSCILLATION LIMIT = 0.1753
  *** WARNING *** CP = 3.500 TIME= 14:14:03
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 3.609 TIME= 14:14:03
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:03 JAN 26, 2023 CP= 3.656
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 8 SUBSTEP 1 COMPLETED. CUM ITER = 8
  *** TIME = 0.800000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.44 OSCILLATION LIMIT = 0.1844
  *** WARNING *** CP = 3.984 TIME= 14:14:04
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 4.016 TIME= 14:14:04
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:04 JAN 26, 2023 CP= 4.078
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 9 SUBSTEP 1 COMPLETED. CUM ITER = 9
  *** TIME = 0.900000E-01 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.22 OSCILLATION LIMIT = 0.1922
  *** WARNING *** CP = 4.391 TIME= 14:14:04
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 4.516 TIME= 14:14:04
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:04 JAN 26, 2023 CP= 4.562
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 10 SUBSTEP 1 COMPLETED. CUM ITER = 10
  *** TIME = 0.100000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.81 OSCILLATION LIMIT = 0.1981
  *** WARNING *** CP = 4.875 TIME= 14:14:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 4.938 TIME= 14:14:05
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:05 JAN 26, 2023 CP= 5.000
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 11 SUBSTEP 1 COMPLETED. CUM ITER = 11
  *** TIME = 0.110000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.18 OSCILLATION LIMIT = 0.2018
  *** WARNING *** CP = 5.312 TIME= 14:14:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 5.344 TIME= 14:14:05
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:05 JAN 26, 2023 CP= 5.406
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 12 SUBSTEP 1 COMPLETED. CUM ITER = 12
  *** TIME = 0.120000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.36 OSCILLATION LIMIT = 0.2036
  *** WARNING *** CP = 5.734 TIME= 14:14:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 5.766 TIME= 14:14:05
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:06 JAN 26, 2023 CP= 5.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 13 SUBSTEP 1 COMPLETED. CUM ITER = 13
  *** TIME = 0.130000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.39 OSCILLATION LIMIT = 0.2039
  *** WARNING *** CP = 6.141 TIME= 14:14:06
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 6.172 TIME= 14:14:06
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:06 JAN 26, 2023 CP= 6.234
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 14 SUBSTEP 1 COMPLETED. CUM ITER = 14
  *** TIME = 0.140000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.32 OSCILLATION LIMIT = 0.2032
  *** WARNING *** CP = 6.547 TIME= 14:14:06
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 6.625 TIME= 14:14:06
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:06 JAN 26, 2023 CP= 6.719
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 15 SUBSTEP 1 COMPLETED. CUM ITER = 15
  *** TIME = 0.150000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.24 OSCILLATION LIMIT = 0.2024
  *** WARNING *** CP = 7.031 TIME= 14:14:07
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 7.078 TIME= 14:14:07
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:07 JAN 26, 2023 CP= 7.125
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 16 SUBSTEP 1 COMPLETED. CUM ITER = 16
  *** TIME = 0.160000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.20 OSCILLATION LIMIT = 0.2020
  *** WARNING *** CP = 7.438 TIME= 14:14:07
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 7.469 TIME= 14:14:07
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:07 JAN 26, 2023 CP= 7.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 17 SUBSTEP 1 COMPLETED. CUM ITER = 17
  *** TIME = 0.170000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.23 OSCILLATION LIMIT = 0.2023
  *** WARNING *** CP = 7.844 TIME= 14:14:08
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 7.922 TIME= 14:14:08
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:08 JAN 26, 2023 CP= 8.031
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 18 SUBSTEP 1 COMPLETED. CUM ITER = 18
  *** TIME = 0.180000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.34 OSCILLATION LIMIT = 0.2034
  *** WARNING *** CP = 8.359 TIME= 14:14:08
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 8.453 TIME= 14:14:08
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:08 JAN 26, 2023 CP= 8.562
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 19 SUBSTEP 1 COMPLETED. CUM ITER = 19
  *** TIME = 0.190000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.49 OSCILLATION LIMIT = 0.2049
  *** WARNING *** CP = 8.906 TIME= 14:14:08
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 8.969 TIME= 14:14:09
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:09 JAN 26, 2023 CP= 9.047
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 20 SUBSTEP 1 COMPLETED. CUM ITER = 20
  *** TIME = 0.200000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.64 OSCILLATION LIMIT = 0.2064
  *** WARNING *** CP = 9.359 TIME= 14:14:09
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 9.438 TIME= 14:14:09
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:09 JAN 26, 2023 CP= 9.500
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 21 SUBSTEP 1 COMPLETED. CUM ITER = 21
  *** TIME = 0.210000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.74 OSCILLATION LIMIT = 0.2074
  *** WARNING *** CP = 9.844 TIME= 14:14:09
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 9.906 TIME= 14:14:09
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:10 JAN 26, 2023 CP= 9.984
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 22 SUBSTEP 1 COMPLETED. CUM ITER = 22
  *** TIME = 0.220000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.77 OSCILLATION LIMIT = 0.2077
  *** WARNING *** CP = 10.312 TIME= 14:14:10
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 10.391 TIME= 14:14:10
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:10 JAN 26, 2023 CP= 10.453
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 23 SUBSTEP 1 COMPLETED. CUM ITER = 23
  *** TIME = 0.230000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.71 OSCILLATION LIMIT = 0.2071
  *** WARNING *** CP = 10.797 TIME= 14:14:10
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 10.859 TIME= 14:14:10
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:10 JAN 26, 2023 CP= 10.922
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 24 SUBSTEP 1 COMPLETED. CUM ITER = 24
  *** TIME = 0.240000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.59 OSCILLATION LIMIT = 0.2059
  *** WARNING *** CP = 11.250 TIME= 14:14:11
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 11.297 TIME= 14:14:11
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:11 JAN 26, 2023 CP= 11.375
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 25 SUBSTEP 1 COMPLETED. CUM ITER = 25
  *** TIME = 0.250000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.43 OSCILLATION LIMIT = 0.2043
  *** WARNING *** CP = 11.703 TIME= 14:14:11
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 11.750 TIME= 14:14:11
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:11 JAN 26, 2023 CP= 11.859
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 26 SUBSTEP 1 COMPLETED. CUM ITER = 26
  *** TIME = 0.260000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.28 OSCILLATION LIMIT = 0.2028
  *** WARNING *** CP = 12.156 TIME= 14:14:12
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 12.266 TIME= 14:14:12
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:12 JAN 26, 2023 CP= 12.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 27 SUBSTEP 1 COMPLETED. CUM ITER = 27
  *** TIME = 0.270000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.15 OSCILLATION LIMIT = 0.2015
  *** WARNING *** CP = 12.672 TIME= 14:14:12
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 12.750 TIME= 14:14:12
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:12 JAN 26, 2023 CP= 12.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 28 SUBSTEP 1 COMPLETED. CUM ITER = 28
  *** TIME = 0.280000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.07 OSCILLATION LIMIT = 0.2007
  *** WARNING *** CP = 13.109 TIME= 14:14:13
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 13.188 TIME= 14:14:13
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:13 JAN 26, 2023 CP= 13.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 29 SUBSTEP 1 COMPLETED. CUM ITER = 29
  *** TIME = 0.290000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.03 OSCILLATION LIMIT = 0.2003
  *** WARNING *** CP = 13.547 TIME= 14:14:13
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 13.594 TIME= 14:14:13
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:13 JAN 26, 2023 CP= 13.656
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 30 SUBSTEP 1 COMPLETED. CUM ITER = 30
  *** TIME = 0.300000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.03 OSCILLATION LIMIT = 0.2003
  *** WARNING *** CP = 14.000 TIME= 14:14:14
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 14.109 TIME= 14:14:14
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:14 JAN 26, 2023 CP= 14.188
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 31 SUBSTEP 1 COMPLETED. CUM ITER = 31
  *** TIME = 0.310000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.05 OSCILLATION LIMIT = 0.2005
  *** WARNING *** CP = 14.516 TIME= 14:14:14
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 14.625 TIME= 14:14:14
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:14 JAN 26, 2023 CP= 14.688
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 32 SUBSTEP 1 COMPLETED. CUM ITER = 32
  *** TIME = 0.320000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.06 OSCILLATION LIMIT = 0.2006
  *** WARNING *** CP = 14.984 TIME= 14:14:15
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 15.062 TIME= 14:14:15
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:15 JAN 26, 2023 CP= 15.125
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 33 SUBSTEP 1 COMPLETED. CUM ITER = 33
  *** TIME = 0.330000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.05 OSCILLATION LIMIT = 0.2005
  *** WARNING *** CP = 15.469 TIME= 14:14:15
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 15.500 TIME= 14:14:15
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:15 JAN 26, 2023 CP= 15.578
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 34 SUBSTEP 1 COMPLETED. CUM ITER = 34
  *** TIME = 0.340000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 20.00 OSCILLATION LIMIT = 0.2000
  *** WARNING *** CP = 15.906 TIME= 14:14:15
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 16.000 TIME= 14:14:15
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:16 JAN 26, 2023 CP= 16.062
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 35 SUBSTEP 1 COMPLETED. CUM ITER = 35
  *** TIME = 0.350000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.90 OSCILLATION LIMIT = 0.1990
  *** WARNING *** CP = 16.406 TIME= 14:14:16
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 16.438 TIME= 14:14:16
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:16 JAN 26, 2023 CP= 16.500
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 36 SUBSTEP 1 COMPLETED. CUM ITER = 36
  *** TIME = 0.360000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.77 OSCILLATION LIMIT = 0.1977
  *** WARNING *** CP = 16.844 TIME= 14:14:16
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 16.891 TIME= 14:14:16
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:16 JAN 26, 2023 CP= 16.953
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 37 SUBSTEP 1 COMPLETED. CUM ITER = 37
  *** TIME = 0.370000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.63 OSCILLATION LIMIT = 0.1963
  *** WARNING *** CP = 17.281 TIME= 14:14:17
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 17.328 TIME= 14:14:17
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:17 JAN 26, 2023 CP= 17.391
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 38 SUBSTEP 1 COMPLETED. CUM ITER = 38
  *** TIME = 0.380000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.50 OSCILLATION LIMIT = 0.1950
  *** WARNING *** CP = 17.734 TIME= 14:14:17
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 17.797 TIME= 14:14:17
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:17 JAN 26, 2023 CP= 17.875
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 39 SUBSTEP 1 COMPLETED. CUM ITER = 39
  *** TIME = 0.390000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.42 OSCILLATION LIMIT = 0.1942
  *** WARNING *** CP = 18.203 TIME= 14:14:18
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 18.281 TIME= 14:14:18
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:18 JAN 26, 2023 CP= 18.344
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 40 SUBSTEP 1 COMPLETED. CUM ITER = 40
  *** TIME = 0.400000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.38 OSCILLATION LIMIT = 0.1938
  *** WARNING *** CP = 18.672 TIME= 14:14:18
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 18.781 TIME= 14:14:18
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:18 JAN 26, 2023 CP= 18.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 41 SUBSTEP 1 COMPLETED. CUM ITER = 41
  *** TIME = 0.410000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.38 OSCILLATION LIMIT = 0.1938
  *** WARNING *** CP = 19.188 TIME= 14:14:19
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 19.250 TIME= 14:14:19
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:19 JAN 26, 2023 CP= 19.312
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 42 SUBSTEP 1 COMPLETED. CUM ITER = 42
  *** TIME = 0.420000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.40 OSCILLATION LIMIT = 0.1940
  *** WARNING *** CP = 19.641 TIME= 14:14:19
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 19.719 TIME= 14:14:19
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:19 JAN 26, 2023 CP= 19.781
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 43 SUBSTEP 1 COMPLETED. CUM ITER = 43
  *** TIME = 0.430000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.42 OSCILLATION LIMIT = 0.1942
  *** WARNING *** CP = 20.125 TIME= 14:14:19
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 20.188 TIME= 14:14:20
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:20 JAN 26, 2023 CP= 20.266
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 44 SUBSTEP 1 COMPLETED. CUM ITER = 44
  *** TIME = 0.440000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.42 OSCILLATION LIMIT = 0.1942
  *** WARNING *** CP = 20.594 TIME= 14:14:20
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 20.672 TIME= 14:14:20
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:20 JAN 26, 2023 CP= 20.781
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 45 SUBSTEP 1 COMPLETED. CUM ITER = 45
  *** TIME = 0.450000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.38 OSCILLATION LIMIT = 0.1938
  *** WARNING *** CP = 21.109 TIME= 14:14:20
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 21.188 TIME= 14:14:20
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:21 JAN 26, 2023 CP= 21.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 46 SUBSTEP 1 COMPLETED. CUM ITER = 46
  *** TIME = 0.460000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.31 OSCILLATION LIMIT = 0.1931
  *** WARNING *** CP = 21.594 TIME= 14:14:21
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 21.672 TIME= 14:14:21
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:21 JAN 26, 2023 CP= 21.750
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 47 SUBSTEP 1 COMPLETED. CUM ITER = 47
  *** TIME = 0.470000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.23 OSCILLATION LIMIT = 0.1923
  *** WARNING *** CP = 22.078 TIME= 14:14:21
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 22.156 TIME= 14:14:21
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:21 JAN 26, 2023 CP= 22.219
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 48 SUBSTEP 1 COMPLETED. CUM ITER = 48
  *** TIME = 0.480000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.14 OSCILLATION LIMIT = 0.1914
  *** WARNING *** CP = 22.531 TIME= 14:14:22
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 22.594 TIME= 14:14:22
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:22 JAN 26, 2023 CP= 22.656
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 49 SUBSTEP 1 COMPLETED. CUM ITER = 49
  *** TIME = 0.490000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.06 OSCILLATION LIMIT = 0.1906
  *** WARNING *** CP = 22.984 TIME= 14:14:22
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 23.031 TIME= 14:14:22
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:22 JAN 26, 2023 CP= 23.109
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 50 SUBSTEP 1 COMPLETED. CUM ITER = 50
  *** TIME = 0.500000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 19.01 OSCILLATION LIMIT = 0.1901
  *** WARNING *** CP = 23.438 TIME= 14:14:23
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 23.484 TIME= 14:14:23
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:23 JAN 26, 2023 CP= 23.547
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 51 SUBSTEP 1 COMPLETED. CUM ITER = 51
  *** TIME = 0.510000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.97 OSCILLATION LIMIT = 0.1897
  *** WARNING *** CP = 23.859 TIME= 14:14:23
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 23.906 TIME= 14:14:23
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:23 JAN 26, 2023 CP= 24.016
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 52 SUBSTEP 1 COMPLETED. CUM ITER = 52
  *** TIME = 0.520000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.95 OSCILLATION LIMIT = 0.1895
  *** WARNING *** CP = 24.344 TIME= 14:14:24
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 24.438 TIME= 14:14:24
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:24 JAN 26, 2023 CP= 24.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 53 SUBSTEP 1 COMPLETED. CUM ITER = 53
  *** TIME = 0.530000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.93 OSCILLATION LIMIT = 0.1893
  *** WARNING *** CP = 24.844 TIME= 14:14:24
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 24.906 TIME= 14:14:24
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:24 JAN 26, 2023 CP= 25.016
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 54 SUBSTEP 1 COMPLETED. CUM ITER = 54
  *** TIME = 0.540000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.89 OSCILLATION LIMIT = 0.1889
  *** WARNING *** CP = 25.328 TIME= 14:14:25
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 25.391 TIME= 14:14:25
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:25 JAN 26, 2023 CP= 25.453
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 55 SUBSTEP 1 COMPLETED. CUM ITER = 55
  *** TIME = 0.550000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.84 OSCILLATION LIMIT = 0.1884
  *** WARNING *** CP = 25.781 TIME= 14:14:25
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 25.859 TIME= 14:14:25
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:25 JAN 26, 2023 CP= 25.938
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 56 SUBSTEP 1 COMPLETED. CUM ITER = 56
  *** TIME = 0.560000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.78 OSCILLATION LIMIT = 0.1878
  *** WARNING *** CP = 26.266 TIME= 14:14:25
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 26.328 TIME= 14:14:25
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:26 JAN 26, 2023 CP= 26.391
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 57 SUBSTEP 1 COMPLETED. CUM ITER = 57
  *** TIME = 0.570000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.71 OSCILLATION LIMIT = 0.1871
  *** WARNING *** CP = 26.719 TIME= 14:14:26
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 26.781 TIME= 14:14:26
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:26 JAN 26, 2023 CP= 26.891
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 58 SUBSTEP 1 COMPLETED. CUM ITER = 58
  *** TIME = 0.580000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.66 OSCILLATION LIMIT = 0.1866
  *** WARNING *** CP = 27.234 TIME= 14:14:26
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 27.312 TIME= 14:14:26
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:26 JAN 26, 2023 CP= 27.391
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 59 SUBSTEP 1 COMPLETED. CUM ITER = 59
  *** TIME = 0.590000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.62 OSCILLATION LIMIT = 0.1862
  *** WARNING *** CP = 27.719 TIME= 14:14:27
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 27.781 TIME= 14:14:27
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:27 JAN 26, 2023 CP= 27.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 60 SUBSTEP 1 COMPLETED. CUM ITER = 60
  *** TIME = 0.600000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.61 OSCILLATION LIMIT = 0.1861
  *** WARNING *** CP = 28.172 TIME= 14:14:27
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 28.219 TIME= 14:14:27
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:27 JAN 26, 2023 CP= 28.297
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 61 SUBSTEP 1 COMPLETED. CUM ITER = 61
  *** TIME = 0.610000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.61 OSCILLATION LIMIT = 0.1861
  *** WARNING *** CP = 28.625 TIME= 14:14:28
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 28.750 TIME= 14:14:28
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:28 JAN 26, 2023 CP= 28.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 62 SUBSTEP 1 COMPLETED. CUM ITER = 62
  *** TIME = 0.620000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.62 OSCILLATION LIMIT = 0.1862
  *** WARNING *** CP = 29.141 TIME= 14:14:28
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 29.188 TIME= 14:14:28
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:28 JAN 26, 2023 CP= 29.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 63 SUBSTEP 1 COMPLETED. CUM ITER = 63
  *** TIME = 0.630000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.65 OSCILLATION LIMIT = 0.1865
  *** WARNING *** CP = 29.594 TIME= 14:14:29
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 29.672 TIME= 14:14:29
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:29 JAN 26, 2023 CP= 29.750
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 64 SUBSTEP 1 COMPLETED. CUM ITER = 64
  *** TIME = 0.640000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.67 OSCILLATION LIMIT = 0.1867
  *** WARNING *** CP = 30.078 TIME= 14:14:29
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 30.125 TIME= 14:14:29
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:29 JAN 26, 2023 CP= 30.234
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 65 SUBSTEP 1 COMPLETED. CUM ITER = 65
  *** TIME = 0.650000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.69 OSCILLATION LIMIT = 0.1869
  *** WARNING *** CP = 30.531 TIME= 14:14:30
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 30.609 TIME= 14:14:30
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:30 JAN 26, 2023 CP= 30.672
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 66 SUBSTEP 1 COMPLETED. CUM ITER = 66
  *** TIME = 0.660000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.70 OSCILLATION LIMIT = 0.1870
  *** WARNING *** CP = 31.016 TIME= 14:14:30
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 31.078 TIME= 14:14:30
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:30 JAN 26, 2023 CP= 31.156
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 67 SUBSTEP 1 COMPLETED. CUM ITER = 67
  *** TIME = 0.670000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.70 OSCILLATION LIMIT = 0.1870
  *** WARNING *** CP = 31.484 TIME= 14:14:31
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 31.609 TIME= 14:14:31
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:31 JAN 26, 2023 CP= 31.672
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 68 SUBSTEP 1 COMPLETED. CUM ITER = 68
  *** TIME = 0.680000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.67 OSCILLATION LIMIT = 0.1867
  *** WARNING *** CP = 32.016 TIME= 14:14:31
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 32.078 TIME= 14:14:31
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:31 JAN 26, 2023 CP= 32.141
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 69 SUBSTEP 1 COMPLETED. CUM ITER = 69
  *** TIME = 0.690000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.63 OSCILLATION LIMIT = 0.1863
  *** WARNING *** CP = 32.469 TIME= 14:14:31
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 32.516 TIME= 14:14:32
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:32 JAN 26, 2023 CP= 32.594
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 70 SUBSTEP 1 COMPLETED. CUM ITER = 70
  *** TIME = 0.700000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.56 OSCILLATION LIMIT = 0.1856
  *** WARNING *** CP = 32.922 TIME= 14:14:32
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 33.000 TIME= 14:14:32
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:32 JAN 26, 2023 CP= 33.062
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 71 SUBSTEP 1 COMPLETED. CUM ITER = 71
  *** TIME = 0.710000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.48 OSCILLATION LIMIT = 0.1848
  *** WARNING *** CP = 33.406 TIME= 14:14:32
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 33.438 TIME= 14:14:32
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:33 JAN 26, 2023 CP= 33.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 72 SUBSTEP 1 COMPLETED. CUM ITER = 72
  *** TIME = 0.720000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.40 OSCILLATION LIMIT = 0.1840
  *** WARNING *** CP = 33.844 TIME= 14:14:33
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 33.922 TIME= 14:14:33
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:33 JAN 26, 2023 CP= 33.984
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 73 SUBSTEP 1 COMPLETED. CUM ITER = 73
  *** TIME = 0.730000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.32 OSCILLATION LIMIT = 0.1832
  *** WARNING *** CP = 34.312 TIME= 14:14:33
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 34.344 TIME= 14:14:33
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:33 JAN 26, 2023 CP= 34.406
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 74 SUBSTEP 1 COMPLETED. CUM ITER = 74
  *** TIME = 0.740000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 34.750 TIME= 14:14:34
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 34.781 TIME= 14:14:34
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:34 JAN 26, 2023 CP= 34.859
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 75 SUBSTEP 1 COMPLETED. CUM ITER = 75
  *** TIME = 0.750000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.27 OSCILLATION LIMIT = 0.1827
  *** WARNING *** CP = 35.188 TIME= 14:14:34
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 35.266 TIME= 14:14:34
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:34 JAN 26, 2023 CP= 35.344
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 76 SUBSTEP 1 COMPLETED. CUM ITER = 76
  *** TIME = 0.760000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.32 OSCILLATION LIMIT = 0.1832
  *** WARNING *** CP = 35.656 TIME= 14:14:35
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 35.750 TIME= 14:14:35
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:35 JAN 26, 2023 CP= 35.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 77 SUBSTEP 1 COMPLETED. CUM ITER = 77
  *** TIME = 0.770000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.41 OSCILLATION LIMIT = 0.1841
  *** WARNING *** CP = 36.156 TIME= 14:14:35
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 36.203 TIME= 14:14:35
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:35 JAN 26, 2023 CP= 36.281
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 78 SUBSTEP 1 COMPLETED. CUM ITER = 78
  *** TIME = 0.780000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.52 OSCILLATION LIMIT = 0.1852
  *** WARNING *** CP = 36.609 TIME= 14:14:36
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 36.672 TIME= 14:14:36
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:36 JAN 26, 2023 CP= 36.781
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 79 SUBSTEP 1 COMPLETED. CUM ITER = 79
  *** TIME = 0.790000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.61 OSCILLATION LIMIT = 0.1861
  *** WARNING *** CP = 37.094 TIME= 14:14:36
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 37.188 TIME= 14:14:36
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:36 JAN 26, 2023 CP= 37.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 80 SUBSTEP 1 COMPLETED. CUM ITER = 80
  *** TIME = 0.800000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.67 OSCILLATION LIMIT = 0.1867
  *** WARNING *** CP = 37.594 TIME= 14:14:37
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 37.625 TIME= 14:14:37
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:37 JAN 26, 2023 CP= 37.703
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 81 SUBSTEP 1 COMPLETED. CUM ITER = 81
  *** TIME = 0.810000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.66 OSCILLATION LIMIT = 0.1866
  *** WARNING *** CP = 38.031 TIME= 14:14:37
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 38.125 TIME= 14:14:37
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:37 JAN 26, 2023 CP= 38.188
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 82 SUBSTEP 1 COMPLETED. CUM ITER = 82
  *** TIME = 0.820000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.62 OSCILLATION LIMIT = 0.1862
  *** WARNING *** CP = 38.500 TIME= 14:14:37
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 38.547 TIME= 14:14:37
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:38 JAN 26, 2023 CP= 38.625
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 83 SUBSTEP 1 COMPLETED. CUM ITER = 83
  *** TIME = 0.830000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.54 OSCILLATION LIMIT = 0.1854
  *** WARNING *** CP = 38.953 TIME= 14:14:38
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 39.047 TIME= 14:14:38
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:38 JAN 26, 2023 CP= 39.109
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 84 SUBSTEP 1 COMPLETED. CUM ITER = 84
  *** TIME = 0.840000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.47 OSCILLATION LIMIT = 0.1847
  *** WARNING *** CP = 39.438 TIME= 14:14:38
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 39.547 TIME= 14:14:38
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:38 JAN 26, 2023 CP= 39.609
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 85 SUBSTEP 1 COMPLETED. CUM ITER = 85
  *** TIME = 0.850000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.41 OSCILLATION LIMIT = 0.1841
  *** WARNING *** CP = 39.953 TIME= 14:14:39
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 40.016 TIME= 14:14:39
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:39 JAN 26, 2023 CP= 40.094
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 86 SUBSTEP 1 COMPLETED. CUM ITER = 86
  *** TIME = 0.860000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.38 OSCILLATION LIMIT = 0.1838
  *** WARNING *** CP = 40.422 TIME= 14:14:39
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 40.484 TIME= 14:14:39
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:39 JAN 26, 2023 CP= 40.547
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 87 SUBSTEP 1 COMPLETED. CUM ITER = 87
  *** TIME = 0.870000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 40.859 TIME= 14:14:40
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 40.953 TIME= 14:14:40
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:40 JAN 26, 2023 CP= 41.047
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 88 SUBSTEP 1 COMPLETED. CUM ITER = 88
  *** TIME = 0.880000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 41.391 TIME= 14:14:40
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 41.406 TIME= 14:14:40
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:40 JAN 26, 2023 CP= 41.484
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 89 SUBSTEP 1 COMPLETED. CUM ITER = 89
  *** TIME = 0.890000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 41.812 TIME= 14:14:41
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 41.906 TIME= 14:14:41
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:41 JAN 26, 2023 CP= 42.016
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 90 SUBSTEP 1 COMPLETED. CUM ITER = 90
  *** TIME = 0.900000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.27 OSCILLATION LIMIT = 0.1827
  *** WARNING *** CP = 42.359 TIME= 14:14:41
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 42.438 TIME= 14:14:41
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:41 JAN 26, 2023 CP= 42.500
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 91 SUBSTEP 1 COMPLETED. CUM ITER = 91
  *** TIME = 0.910000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.21 OSCILLATION LIMIT = 0.1821
  *** WARNING *** CP = 42.844 TIME= 14:14:42
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 42.938 TIME= 14:14:42
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:42 JAN 26, 2023 CP= 43.000
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 92 SUBSTEP 1 COMPLETED. CUM ITER = 92
  *** TIME = 0.920000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.16 OSCILLATION LIMIT = 0.1816
  *** WARNING *** CP = 43.328 TIME= 14:14:42
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 43.406 TIME= 14:14:42
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:42 JAN 26, 2023 CP= 43.469
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 93 SUBSTEP 1 COMPLETED. CUM ITER = 93
  *** TIME = 0.930000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.13 OSCILLATION LIMIT = 0.1813
  *** WARNING *** CP = 43.812 TIME= 14:14:43
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 43.891 TIME= 14:14:43
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:43 JAN 26, 2023 CP= 44.000
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 94 SUBSTEP 1 COMPLETED. CUM ITER = 94
  *** TIME = 0.940000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.13 OSCILLATION LIMIT = 0.1813
  *** WARNING *** CP = 44.344 TIME= 14:14:43
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 44.375 TIME= 14:14:43
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:43 JAN 26, 2023 CP= 44.453
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 95 SUBSTEP 1 COMPLETED. CUM ITER = 95
  *** TIME = 0.950000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.17 OSCILLATION LIMIT = 0.1817
  *** WARNING *** CP = 44.781 TIME= 14:14:43
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 44.844 TIME= 14:14:44
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:44 JAN 26, 2023 CP= 44.906
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 96 SUBSTEP 1 COMPLETED. CUM ITER = 96
  *** TIME = 0.960000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.24 OSCILLATION LIMIT = 0.1824
  *** WARNING *** CP = 45.250 TIME= 14:14:44
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 45.359 TIME= 14:14:44
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:44 JAN 26, 2023 CP= 45.469
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 97 SUBSTEP 1 COMPLETED. CUM ITER = 97
  *** TIME = 0.970000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.30 OSCILLATION LIMIT = 0.1830
  *** WARNING *** CP = 45.812 TIME= 14:14:44
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 45.844 TIME= 14:14:44
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:44 JAN 26, 2023 CP= 45.922
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 98 SUBSTEP 1 COMPLETED. CUM ITER = 98
  *** TIME = 0.980000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.35 OSCILLATION LIMIT = 0.1835
  *** WARNING *** CP = 46.250 TIME= 14:14:45
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 46.312 TIME= 14:14:45
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:45 JAN 26, 2023 CP= 46.375
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 99 SUBSTEP 1 COMPLETED. CUM ITER = 99
  *** TIME = 0.990000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 46.703 TIME= 14:14:45
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 46.781 TIME= 14:14:45
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:45 JAN 26, 2023 CP= 46.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 100 SUBSTEP 1 COMPLETED. CUM ITER = 100
  *** TIME = 1.00000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 47.188 TIME= 14:14:46
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 47.234 TIME= 14:14:46
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:46 JAN 26, 2023 CP= 47.312
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 101 SUBSTEP 1 COMPLETED. CUM ITER = 101
  *** TIME = 1.01000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.30 OSCILLATION LIMIT = 0.1830
  *** WARNING *** CP = 47.641 TIME= 14:14:46
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 47.703 TIME= 14:14:46
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:46 JAN 26, 2023 CP= 47.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 102 SUBSTEP 1 COMPLETED. CUM ITER = 102
  *** TIME = 1.02000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.27 OSCILLATION LIMIT = 0.1827
  *** WARNING *** CP = 48.141 TIME= 14:14:47
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 48.219 TIME= 14:14:47
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:47 JAN 26, 2023 CP= 48.297
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 103 SUBSTEP 1 COMPLETED. CUM ITER = 103
  *** TIME = 1.03000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.25 OSCILLATION LIMIT = 0.1825
  *** WARNING *** CP = 48.625 TIME= 14:14:47
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 48.719 TIME= 14:14:47
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:47 JAN 26, 2023 CP= 48.781
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 104 SUBSTEP 1 COMPLETED. CUM ITER = 104
  *** TIME = 1.04000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.26 OSCILLATION LIMIT = 0.1826
  *** WARNING *** CP = 49.109 TIME= 14:14:48
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 49.203 TIME= 14:14:48
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:48 JAN 26, 2023 CP= 49.266
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 105 SUBSTEP 1 COMPLETED. CUM ITER = 105
  *** TIME = 1.05000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.30 OSCILLATION LIMIT = 0.1830
  *** WARNING *** CP = 49.609 TIME= 14:14:48
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 49.641 TIME= 14:14:48
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:48 JAN 26, 2023 CP= 49.719
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 106 SUBSTEP 1 COMPLETED. CUM ITER = 106
  *** TIME = 1.06000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.35 OSCILLATION LIMIT = 0.1835
  *** WARNING *** CP = 50.047 TIME= 14:14:49
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 50.125 TIME= 14:14:49
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:49 JAN 26, 2023 CP= 50.188
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 107 SUBSTEP 1 COMPLETED. CUM ITER = 107
  *** TIME = 1.07000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.40 OSCILLATION LIMIT = 0.1840
  *** WARNING *** CP = 50.516 TIME= 14:14:49
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 50.594 TIME= 14:14:49
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:49 JAN 26, 2023 CP= 50.672
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 108 SUBSTEP 1 COMPLETED. CUM ITER = 108
  *** TIME = 1.08000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.44 OSCILLATION LIMIT = 0.1844
  *** WARNING *** CP = 51.000 TIME= 14:14:49
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 51.047 TIME= 14:14:49
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:50 JAN 26, 2023 CP= 51.109
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 109 SUBSTEP 1 COMPLETED. CUM ITER = 109
  *** TIME = 1.09000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.45 OSCILLATION LIMIT = 0.1845
  *** WARNING *** CP = 51.438 TIME= 14:14:50
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 51.484 TIME= 14:14:50
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:50 JAN 26, 2023 CP= 51.594
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 110 SUBSTEP 1 COMPLETED. CUM ITER = 110
  *** TIME = 1.10000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.43 OSCILLATION LIMIT = 0.1843
  *** WARNING *** CP = 51.938 TIME= 14:14:50
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 52.016 TIME= 14:14:50
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:50 JAN 26, 2023 CP= 52.078
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 111 SUBSTEP 1 COMPLETED. CUM ITER = 111
  *** TIME = 1.11000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.39 OSCILLATION LIMIT = 0.1839
  *** WARNING *** CP = 52.422 TIME= 14:14:51
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 52.469 TIME= 14:14:51
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:51 JAN 26, 2023 CP= 52.531
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 112 SUBSTEP 1 COMPLETED. CUM ITER = 112
  *** TIME = 1.12000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.33 OSCILLATION LIMIT = 0.1833
  *** WARNING *** CP = 52.859 TIME= 14:14:51
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 52.906 TIME= 14:14:51
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:51 JAN 26, 2023 CP= 52.969
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 113 SUBSTEP 1 COMPLETED. CUM ITER = 113
  *** TIME = 1.13000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.26 OSCILLATION LIMIT = 0.1826
  *** WARNING *** CP = 53.312 TIME= 14:14:52
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 53.344 TIME= 14:14:52
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:52 JAN 26, 2023 CP= 53.422
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 114 SUBSTEP 1 COMPLETED. CUM ITER = 114
  *** TIME = 1.14000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.22 OSCILLATION LIMIT = 0.1822
  *** WARNING *** CP = 53.766 TIME= 14:14:52
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 53.828 TIME= 14:14:52
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:52 JAN 26, 2023 CP= 53.891
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 115 SUBSTEP 1 COMPLETED. CUM ITER = 115
  *** TIME = 1.15000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.21 OSCILLATION LIMIT = 0.1821
  *** WARNING *** CP = 54.234 TIME= 14:14:53
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 54.281 TIME= 14:14:53
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:53 JAN 26, 2023 CP= 54.344
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 116 SUBSTEP 1 COMPLETED. CUM ITER = 116
  *** TIME = 1.16000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.23 OSCILLATION LIMIT = 0.1823
  *** WARNING *** CP = 54.656 TIME= 14:14:53
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 54.781 TIME= 14:14:53
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:53 JAN 26, 2023 CP= 54.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 117 SUBSTEP 1 COMPLETED. CUM ITER = 117
  *** TIME = 1.17000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 55.188 TIME= 14:14:53
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 55.250 TIME= 14:14:54
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:54 JAN 26, 2023 CP= 55.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 118 SUBSTEP 1 COMPLETED. CUM ITER = 118
  *** TIME = 1.18000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.35 OSCILLATION LIMIT = 0.1835
  *** WARNING *** CP = 55.641 TIME= 14:14:54
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 55.688 TIME= 14:14:54
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:54 JAN 26, 2023 CP= 55.750
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 119 SUBSTEP 1 COMPLETED. CUM ITER = 119
  *** TIME = 1.19000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.41 OSCILLATION LIMIT = 0.1841
  *** WARNING *** CP = 56.094 TIME= 14:14:54
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 56.141 TIME= 14:14:54
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:55 JAN 26, 2023 CP= 56.219
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 120 SUBSTEP 1 COMPLETED. CUM ITER = 120
  *** TIME = 1.20000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.45 OSCILLATION LIMIT = 0.1845
  *** WARNING *** CP = 56.547 TIME= 14:14:55
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 56.609 TIME= 14:14:55
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:55 JAN 26, 2023 CP= 56.656
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 121 SUBSTEP 1 COMPLETED. CUM ITER = 121
  *** TIME = 1.21000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.45 OSCILLATION LIMIT = 0.1845
  *** WARNING *** CP = 56.969 TIME= 14:14:55
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 57.062 TIME= 14:14:55
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:55 JAN 26, 2023 CP= 57.125
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 122 SUBSTEP 1 COMPLETED. CUM ITER = 122
  *** TIME = 1.22000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.41 OSCILLATION LIMIT = 0.1841
  *** WARNING *** CP = 57.469 TIME= 14:14:56
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 57.531 TIME= 14:14:56
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:56 JAN 26, 2023 CP= 57.609
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 123 SUBSTEP 1 COMPLETED. CUM ITER = 123
  *** TIME = 1.23000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 57.938 TIME= 14:14:56
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 58.016 TIME= 14:14:56
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:56 JAN 26, 2023 CP= 58.078
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 124 SUBSTEP 1 COMPLETED. CUM ITER = 124
  *** TIME = 1.24000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.26 OSCILLATION LIMIT = 0.1826
  *** WARNING *** CP = 58.375 TIME= 14:14:57
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 58.422 TIME= 14:14:57
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:57 JAN 26, 2023 CP= 58.484
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 125 SUBSTEP 1 COMPLETED. CUM ITER = 125
  *** TIME = 1.25000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.19 OSCILLATION LIMIT = 0.1819
  *** WARNING *** CP = 58.828 TIME= 14:14:57
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 58.875 TIME= 14:14:57
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:57 JAN 26, 2023 CP= 58.953
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 126 SUBSTEP 1 COMPLETED. CUM ITER = 126
  *** TIME = 1.26000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.13 OSCILLATION LIMIT = 0.1813
  *** WARNING *** CP = 59.281 TIME= 14:14:58
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 59.375 TIME= 14:14:58
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:58 JAN 26, 2023 CP= 59.438
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 127 SUBSTEP 1 COMPLETED. CUM ITER = 127
  *** TIME = 1.27000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.12 OSCILLATION LIMIT = 0.1812
  *** WARNING *** CP = 59.766 TIME= 14:14:58
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 59.875 TIME= 14:14:58
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:58 JAN 26, 2023 CP= 59.984
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 128 SUBSTEP 1 COMPLETED. CUM ITER = 128
  *** TIME = 1.28000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.13 OSCILLATION LIMIT = 0.1813
  *** WARNING *** CP = 60.328 TIME= 14:14:59
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 60.359 TIME= 14:14:59
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:59 JAN 26, 2023 CP= 60.438
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 129 SUBSTEP 1 COMPLETED. CUM ITER = 129
  *** TIME = 1.29000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.17 OSCILLATION LIMIT = 0.1817
  *** WARNING *** CP = 60.766 TIME= 14:14:59
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 60.828 TIME= 14:14:59
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:14:59 JAN 26, 2023 CP= 60.938
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 130 SUBSTEP 1 COMPLETED. CUM ITER = 130
  *** TIME = 1.30000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.23 OSCILLATION LIMIT = 0.1823
  *** WARNING *** CP = 61.281 TIME= 14:14:59
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 61.344 TIME= 14:15:00
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:00 JAN 26, 2023 CP= 61.406
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 131 SUBSTEP 1 COMPLETED. CUM ITER = 131
  *** TIME = 1.31000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 61.750 TIME= 14:15:00
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 61.797 TIME= 14:15:00
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:00 JAN 26, 2023 CP= 61.859
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 132 SUBSTEP 1 COMPLETED. CUM ITER = 132
  *** TIME = 1.32000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.32 OSCILLATION LIMIT = 0.1832
  *** WARNING *** CP = 62.172 TIME= 14:15:00
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 62.250 TIME= 14:15:00
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:01 JAN 26, 2023 CP= 62.312
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 133 SUBSTEP 1 COMPLETED. CUM ITER = 133
  *** TIME = 1.33000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 62.656 TIME= 14:15:01
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 62.719 TIME= 14:15:01
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:01 JAN 26, 2023 CP= 62.781
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 134 SUBSTEP 1 COMPLETED. CUM ITER = 134
  *** TIME = 1.34000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.35 OSCILLATION LIMIT = 0.1835
  *** WARNING *** CP = 63.125 TIME= 14:15:01
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 63.219 TIME= 14:15:01
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:01 JAN 26, 2023 CP= 63.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 135 SUBSTEP 1 COMPLETED. CUM ITER = 135
  *** TIME = 1.35000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 63.672 TIME= 14:15:02
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 63.734 TIME= 14:15:02
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:02 JAN 26, 2023 CP= 63.797
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 136 SUBSTEP 1 COMPLETED. CUM ITER = 136
  *** TIME = 1.36000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 64.094 TIME= 14:15:02
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 64.250 TIME= 14:15:02
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:02 JAN 26, 2023 CP= 64.359
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 137 SUBSTEP 1 COMPLETED. CUM ITER = 137
  *** TIME = 1.37000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 64.703 TIME= 14:15:03
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 64.766 TIME= 14:15:03
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:03 JAN 26, 2023 CP= 64.828
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 138 SUBSTEP 1 COMPLETED. CUM ITER = 138
  *** TIME = 1.38000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 65.172 TIME= 14:15:03
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 65.234 TIME= 14:15:03
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:03 JAN 26, 2023 CP= 65.312
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 139 SUBSTEP 1 COMPLETED. CUM ITER = 139
  *** TIME = 1.39000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 65.641 TIME= 14:15:04
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 65.734 TIME= 14:15:04
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:04 JAN 26, 2023 CP= 65.797
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 140 SUBSTEP 1 COMPLETED. CUM ITER = 140
  *** TIME = 1.40000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 66.141 TIME= 14:15:04
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 66.172 TIME= 14:15:04
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:04 JAN 26, 2023 CP= 66.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 141 SUBSTEP 1 COMPLETED. CUM ITER = 141
  *** TIME = 1.41000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.27 OSCILLATION LIMIT = 0.1827
  *** WARNING *** CP = 66.578 TIME= 14:15:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 66.641 TIME= 14:15:05
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:05 JAN 26, 2023 CP= 66.703
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 142 SUBSTEP 1 COMPLETED. CUM ITER = 142
  *** TIME = 1.42000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.23 OSCILLATION LIMIT = 0.1823
  *** WARNING *** CP = 67.000 TIME= 14:15:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 67.062 TIME= 14:15:05
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:05 JAN 26, 2023 CP= 67.125
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 143 SUBSTEP 1 COMPLETED. CUM ITER = 143
  *** TIME = 1.43000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.18 OSCILLATION LIMIT = 0.1818
  *** WARNING *** CP = 67.469 TIME= 14:15:05
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 67.500 TIME= 14:15:06
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:06 JAN 26, 2023 CP= 67.578
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 144 SUBSTEP 1 COMPLETED. CUM ITER = 144
  *** TIME = 1.44000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.14 OSCILLATION LIMIT = 0.1814
  *** WARNING *** CP = 67.906 TIME= 14:15:06
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 67.984 TIME= 14:15:06
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:06 JAN 26, 2023 CP= 68.047
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 145 SUBSTEP 1 COMPLETED. CUM ITER = 145
  *** TIME = 1.45000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.11 OSCILLATION LIMIT = 0.1811
  *** WARNING *** CP = 68.391 TIME= 14:15:06
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 68.453 TIME= 14:15:06
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:07 JAN 26, 2023 CP= 68.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 146 SUBSTEP 1 COMPLETED. CUM ITER = 146
  *** TIME = 1.46000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.11 OSCILLATION LIMIT = 0.1811
  *** WARNING *** CP = 68.859 TIME= 14:15:07
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 68.891 TIME= 14:15:07
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:07 JAN 26, 2023 CP= 68.969
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 147 SUBSTEP 1 COMPLETED. CUM ITER = 147
  *** TIME = 1.47000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.12 OSCILLATION LIMIT = 0.1812
  *** WARNING *** CP = 69.281 TIME= 14:15:07
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 69.344 TIME= 14:15:07
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:07 JAN 26, 2023 CP= 69.406
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 148 SUBSTEP 1 COMPLETED. CUM ITER = 148
  *** TIME = 1.48000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.14 OSCILLATION LIMIT = 0.1814
  *** WARNING *** CP = 69.750 TIME= 14:15:08
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 69.812 TIME= 14:15:08
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:08 JAN 26, 2023 CP= 69.891
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 149 SUBSTEP 1 COMPLETED. CUM ITER = 149
  *** TIME = 1.49000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.16 OSCILLATION LIMIT = 0.1816
  *** WARNING *** CP = 70.219 TIME= 14:15:08
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 70.266 TIME= 14:15:08
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:08 JAN 26, 2023 CP= 70.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 150 SUBSTEP 1 COMPLETED. CUM ITER = 150
  *** TIME = 1.50000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.15 OSCILLATION LIMIT = 0.1815
  *** WARNING *** CP = 70.609 TIME= 14:15:09
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 70.734 TIME= 14:15:09
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:09 JAN 26, 2023 CP= 70.797
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 151 SUBSTEP 1 COMPLETED. CUM ITER = 151
  *** TIME = 1.51000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.12 OSCILLATION LIMIT = 0.1812
  *** WARNING *** CP = 71.141 TIME= 14:15:09
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 71.203 TIME= 14:15:09
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:09 JAN 26, 2023 CP= 71.281
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 152 SUBSTEP 1 COMPLETED. CUM ITER = 152
  *** TIME = 1.52000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.06 OSCILLATION LIMIT = 0.1806
  *** WARNING *** CP = 71.609 TIME= 14:15:10
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 71.656 TIME= 14:15:10
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:10 JAN 26, 2023 CP= 71.719
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 153 SUBSTEP 1 COMPLETED. CUM ITER = 153
  *** TIME = 1.53000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.01 OSCILLATION LIMIT = 0.1801
  *** WARNING *** CP = 72.062 TIME= 14:15:10
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 72.125 TIME= 14:15:10
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:10 JAN 26, 2023 CP= 72.203
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 154 SUBSTEP 1 COMPLETED. CUM ITER = 154
  *** TIME = 1.54000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.98 OSCILLATION LIMIT = 0.1798
  *** WARNING *** CP = 72.531 TIME= 14:15:11
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 72.625 TIME= 14:15:11
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:11 JAN 26, 2023 CP= 72.688
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 155 SUBSTEP 1 COMPLETED. CUM ITER = 155
  *** TIME = 1.55000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.99 OSCILLATION LIMIT = 0.1799
  *** WARNING *** CP = 73.016 TIME= 14:15:11
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 73.156 TIME= 14:15:11
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:11 JAN 26, 2023 CP= 73.266
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 156 SUBSTEP 1 COMPLETED. CUM ITER = 156
  *** TIME = 1.56000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.02 OSCILLATION LIMIT = 0.1802
  *** WARNING *** CP = 73.609 TIME= 14:15:11
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 73.641 TIME= 14:15:12
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:12 JAN 26, 2023 CP= 73.719
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 157 SUBSTEP 1 COMPLETED. CUM ITER = 157
  *** TIME = 1.57000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.07 OSCILLATION LIMIT = 0.1807
  *** WARNING *** CP = 74.031 TIME= 14:15:12
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 74.078 TIME= 14:15:12
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:12 JAN 26, 2023 CP= 74.141
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 158 SUBSTEP 1 COMPLETED. CUM ITER = 158
  *** TIME = 1.58000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.10 OSCILLATION LIMIT = 0.1810
  *** WARNING *** CP = 74.469 TIME= 14:15:12
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 74.531 TIME= 14:15:12
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:12 JAN 26, 2023 CP= 74.594
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 159 SUBSTEP 1 COMPLETED. CUM ITER = 159
  *** TIME = 1.59000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.10 OSCILLATION LIMIT = 0.1810
  *** WARNING *** CP = 74.938 TIME= 14:15:13
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 74.969 TIME= 14:15:13
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:13 JAN 26, 2023 CP= 75.047
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 160 SUBSTEP 1 COMPLETED. CUM ITER = 160
  *** TIME = 1.60000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.06 OSCILLATION LIMIT = 0.1806
  *** WARNING *** CP = 75.375 TIME= 14:15:13
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 75.484 TIME= 14:15:13
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:13 JAN 26, 2023 CP= 75.547
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 161 SUBSTEP 1 COMPLETED. CUM ITER = 161
  *** TIME = 1.61000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.99 OSCILLATION LIMIT = 0.1799
  *** WARNING *** CP = 75.922 TIME= 14:15:14
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 76.031 TIME= 14:15:14
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:14 JAN 26, 2023 CP= 76.109
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 162 SUBSTEP 1 COMPLETED. CUM ITER = 162
  *** TIME = 1.62000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.92 OSCILLATION LIMIT = 0.1792
  *** WARNING *** CP = 76.438 TIME= 14:15:14
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 76.500 TIME= 14:15:14
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:14 JAN 26, 2023 CP= 76.578
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 163 SUBSTEP 1 COMPLETED. CUM ITER = 163
  *** TIME = 1.63000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.88 OSCILLATION LIMIT = 0.1788
  *** WARNING *** CP = 76.906 TIME= 14:15:15
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 77.031 TIME= 14:15:15
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:15 JAN 26, 2023 CP= 77.094
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 164 SUBSTEP 1 COMPLETED. CUM ITER = 164
  *** TIME = 1.64000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.88 OSCILLATION LIMIT = 0.1788
  *** WARNING *** CP = 77.438 TIME= 14:15:15
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 77.500 TIME= 14:15:15
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:15 JAN 26, 2023 CP= 77.562
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 165 SUBSTEP 1 COMPLETED. CUM ITER = 165
  *** TIME = 1.65000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.93 OSCILLATION LIMIT = 0.1793
  *** WARNING *** CP = 77.906 TIME= 14:15:16
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 77.969 TIME= 14:15:16
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:16 JAN 26, 2023 CP= 78.031
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 166 SUBSTEP 1 COMPLETED. CUM ITER = 166
  *** TIME = 1.66000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.02 OSCILLATION LIMIT = 0.1802
  *** WARNING *** CP = 78.375 TIME= 14:15:16
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 78.422 TIME= 14:15:16
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:16 JAN 26, 2023 CP= 78.484
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 167 SUBSTEP 1 COMPLETED. CUM ITER = 167
  *** TIME = 1.67000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.12 OSCILLATION LIMIT = 0.1812
  *** WARNING *** CP = 78.797 TIME= 14:15:17
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 78.844 TIME= 14:15:17
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:17 JAN 26, 2023 CP= 78.906
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 168 SUBSTEP 1 COMPLETED. CUM ITER = 168
  *** TIME = 1.68000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.22 OSCILLATION LIMIT = 0.1822
  *** WARNING *** CP = 79.250 TIME= 14:15:17
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 79.312 TIME= 14:15:17
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:17 JAN 26, 2023 CP= 79.391
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 169 SUBSTEP 1 COMPLETED. CUM ITER = 169
  *** TIME = 1.69000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 79.719 TIME= 14:15:17
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 79.781 TIME= 14:15:18
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:18 JAN 26, 2023 CP= 79.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 170 SUBSTEP 1 COMPLETED. CUM ITER = 170
  *** TIME = 1.70000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.36 OSCILLATION LIMIT = 0.1836
  *** WARNING *** CP = 80.188 TIME= 14:15:18
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 80.266 TIME= 14:15:18
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:18 JAN 26, 2023 CP= 80.328
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 171 SUBSTEP 1 COMPLETED. CUM ITER = 171
  *** TIME = 1.71000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.38 OSCILLATION LIMIT = 0.1838
  *** WARNING *** CP = 80.672 TIME= 14:15:18
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 80.766 TIME= 14:15:19
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:19 JAN 26, 2023 CP= 80.844
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 172 SUBSTEP 1 COMPLETED. CUM ITER = 172
  *** TIME = 1.72000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.37 OSCILLATION LIMIT = 0.1837
  *** WARNING *** CP = 81.172 TIME= 14:15:19
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 81.219 TIME= 14:15:19
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:19 JAN 26, 2023 CP= 81.281
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 173 SUBSTEP 1 COMPLETED. CUM ITER = 173
  *** TIME = 1.73000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 81.625 TIME= 14:15:19
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 81.688 TIME= 14:15:19
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:19 JAN 26, 2023 CP= 81.766
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 174 SUBSTEP 1 COMPLETED. CUM ITER = 174
  *** TIME = 1.74000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 82.094 TIME= 14:15:20
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 82.141 TIME= 14:15:20
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:20 JAN 26, 2023 CP= 82.203
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 175 SUBSTEP 1 COMPLETED. CUM ITER = 175
  *** TIME = 1.75000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 82.531 TIME= 14:15:20
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 82.562 TIME= 14:15:20
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:20 JAN 26, 2023 CP= 82.672
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 176 SUBSTEP 1 COMPLETED. CUM ITER = 176
  *** TIME = 1.76000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.26 OSCILLATION LIMIT = 0.1826
  *** WARNING *** CP = 83.016 TIME= 14:15:21
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 83.062 TIME= 14:15:21
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:21 JAN 26, 2023 CP= 83.141
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 177 SUBSTEP 1 COMPLETED. CUM ITER = 177
  *** TIME = 1.77000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.26 OSCILLATION LIMIT = 0.1826
  *** WARNING *** CP = 83.469 TIME= 14:15:21
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 83.547 TIME= 14:15:21
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:21 JAN 26, 2023 CP= 83.609
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 178 SUBSTEP 1 COMPLETED. CUM ITER = 178
  *** TIME = 1.78000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.27 OSCILLATION LIMIT = 0.1827
  *** WARNING *** CP = 83.938 TIME= 14:15:22
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 84.031 TIME= 14:15:22
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:22 JAN 26, 2023 CP= 84.094
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 179 SUBSTEP 1 COMPLETED. CUM ITER = 179
  *** TIME = 1.79000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 84.438 TIME= 14:15:22
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 84.531 TIME= 14:15:22
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:22 JAN 26, 2023 CP= 84.594
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 180 SUBSTEP 1 COMPLETED. CUM ITER = 180
  *** TIME = 1.80000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.29 OSCILLATION LIMIT = 0.1829
  *** WARNING *** CP = 84.922 TIME= 14:15:23
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 84.969 TIME= 14:15:23
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:23 JAN 26, 2023 CP= 85.031
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 181 SUBSTEP 1 COMPLETED. CUM ITER = 181
  *** TIME = 1.81000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.30 OSCILLATION LIMIT = 0.1830
  *** WARNING *** CP = 85.375 TIME= 14:15:23
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 85.453 TIME= 14:15:23
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:23 JAN 26, 2023 CP= 85.516
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 182 SUBSTEP 1 COMPLETED. CUM ITER = 182
  *** TIME = 1.82000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 85.844 TIME= 14:15:23
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 85.906 TIME= 14:15:24
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:24 JAN 26, 2023 CP= 85.969
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 183 SUBSTEP 1 COMPLETED. CUM ITER = 183
  *** TIME = 1.83000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.31 OSCILLATION LIMIT = 0.1831
  *** WARNING *** CP = 86.297 TIME= 14:15:24
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 86.344 TIME= 14:15:24
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:24 JAN 26, 2023 CP= 86.422
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 184 SUBSTEP 1 COMPLETED. CUM ITER = 184
  *** TIME = 1.84000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.28 OSCILLATION LIMIT = 0.1828
  *** WARNING *** CP = 86.750 TIME= 14:15:24
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 86.828 TIME= 14:15:24
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:25 JAN 26, 2023 CP= 86.891
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 185 SUBSTEP 1 COMPLETED. CUM ITER = 185
  *** TIME = 1.85000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.23 OSCILLATION LIMIT = 0.1823
  *** WARNING *** CP = 87.203 TIME= 14:15:25
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 87.281 TIME= 14:15:25
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:25 JAN 26, 2023 CP= 87.391
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 186 SUBSTEP 1 COMPLETED. CUM ITER = 186
  *** TIME = 1.86000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.14 OSCILLATION LIMIT = 0.1814
  *** WARNING *** CP = 87.719 TIME= 14:15:25
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 87.797 TIME= 14:15:25
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:25 JAN 26, 2023 CP= 87.859
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 187 SUBSTEP 1 COMPLETED. CUM ITER = 187
  *** TIME = 1.87000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.04 OSCILLATION LIMIT = 0.1804
  *** WARNING *** CP = 88.203 TIME= 14:15:26
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 88.266 TIME= 14:15:26
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:26 JAN 26, 2023 CP= 88.344
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 188 SUBSTEP 1 COMPLETED. CUM ITER = 188
  *** TIME = 1.88000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.95 OSCILLATION LIMIT = 0.1795
  *** WARNING *** CP = 88.656 TIME= 14:15:26
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 88.750 TIME= 14:15:26
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:26 JAN 26, 2023 CP= 88.812
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 189 SUBSTEP 1 COMPLETED. CUM ITER = 189
  *** TIME = 1.89000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.90 OSCILLATION LIMIT = 0.1790
  *** WARNING *** CP = 89.141 TIME= 14:15:27
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 89.172 TIME= 14:15:27
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:27 JAN 26, 2023 CP= 89.250
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 190 SUBSTEP 1 COMPLETED. CUM ITER = 190
  *** TIME = 1.90000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.93 OSCILLATION LIMIT = 0.1793
  *** WARNING *** CP = 89.578 TIME= 14:15:27
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 89.625 TIME= 14:15:27
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:27 JAN 26, 2023 CP= 89.688
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 191 SUBSTEP 1 COMPLETED. CUM ITER = 191
  *** TIME = 1.91000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.03 OSCILLATION LIMIT = 0.1803
  *** WARNING *** CP = 90.016 TIME= 14:15:28
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 90.109 TIME= 14:15:28
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:28 JAN 26, 2023 CP= 90.172
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 192 SUBSTEP 1 COMPLETED. CUM ITER = 192
  *** TIME = 1.92000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.18 OSCILLATION LIMIT = 0.1818
  *** WARNING *** CP = 90.516 TIME= 14:15:28
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 90.562 TIME= 14:15:28
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:28 JAN 26, 2023 CP= 90.625
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 193 SUBSTEP 1 COMPLETED. CUM ITER = 193
  *** TIME = 1.93000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.34 OSCILLATION LIMIT = 0.1834
  *** WARNING *** CP = 90.938 TIME= 14:15:29
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 91.016 TIME= 14:15:29
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:29 JAN 26, 2023 CP= 91.094
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 194 SUBSTEP 1 COMPLETED. CUM ITER = 194
  *** TIME = 1.94000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.48 OSCILLATION LIMIT = 0.1848
  *** WARNING *** CP = 91.422 TIME= 14:15:29
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 91.484 TIME= 14:15:29
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:29 JAN 26, 2023 CP= 91.562
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 195 SUBSTEP 1 COMPLETED. CUM ITER = 195
  *** TIME = 1.95000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.54 OSCILLATION LIMIT = 0.1854
  *** WARNING *** CP = 91.891 TIME= 14:15:29
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 92.000 TIME= 14:15:30
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:30 JAN 26, 2023 CP= 92.062
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 196 SUBSTEP 1 COMPLETED. CUM ITER = 196
  *** TIME = 1.96000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.52 OSCILLATION LIMIT = 0.1852
  *** WARNING *** CP = 92.391 TIME= 14:15:30
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 92.484 TIME= 14:15:30
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:30 JAN 26, 2023 CP= 92.547
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 197 SUBSTEP 1 COMPLETED. CUM ITER = 197
  *** TIME = 1.97000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.43 OSCILLATION LIMIT = 0.1843
  *** WARNING *** CP = 92.891 TIME= 14:15:30
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 92.922 TIME= 14:15:30
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:30 JAN 26, 2023 CP= 93.000
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 198 SUBSTEP 1 COMPLETED. CUM ITER = 198
  *** TIME = 1.98000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.29 OSCILLATION LIMIT = 0.1829
  *** WARNING *** CP = 93.328 TIME= 14:15:31
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 93.391 TIME= 14:15:31
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:31 JAN 26, 2023 CP= 93.453
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 199 SUBSTEP 1 COMPLETED. CUM ITER = 199
  *** TIME = 1.99000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 18.14 OSCILLATION LIMIT = 0.1814
  *** WARNING *** CP = 93.797 TIME= 14:15:31
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 93.828 TIME= 14:15:31
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:31 JAN 26, 2023 CP= 93.891
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 200 SUBSTEP 1 COMPLETED. CUM ITER = 200
  *** TIME = 2.00000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.99 OSCILLATION LIMIT = 0.1799
  *** WARNING *** CP = 94.234 TIME= 14:15:32
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  ***** MAPDL SOLVE COMMAND *****
  *** WARNING *** CP = 94.266 TIME= 14:15:32
  Material number 2 (used by element 19193) should normally have at least
  one MP or one TB type command associated with it. Output of energy by
  material may not be available.
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:32 JAN 26, 2023 CP= 94.344
  wbnew--Transient Thermal (A5)
  
  SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr
  *** LOAD STEP 201 SUBSTEP 1 COMPLETED. CUM ITER = 201
  *** TIME = 2.01000 TIME INC = 0.100000E-01 NEW TRIANG MATRIX
  *** RESPONSE EIGENVALUE = 17.88 OSCILLATION LIMIT = 0.1788
  *** WARNING *** CP = 94.672 TIME= 14:15:32
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  SET PARAMETER DIMENSIONS ON VARY_LD TYPE=ARRA DIMENSIONS= 24107 1 1
  *** WARNING *** CP = 94.672 TIME= 14:15:32
  Parameter VARY_LD already exists. It is deleted and redefined by the
  *DIM command.
  SELECT FOR ITEM=TYPE COMPONENT=
  IN RANGE 3 TO 3 STEP 1
  2204 ELEMENTS (OF 21396 DEFINED) SELECTED BY ESEL COMMAND.
  SELECT ALL NODES HAVING ANY ELEMENT IN ELEMENT SET.
  4549 NODES (OF 24107 DEFINED) SELECTED FROM
  2204 SELECTED ELEMENTS BY NSLE COMMAND.
  DELETE SPECIFIED SURFACE LOAD HFLU FOR ALL SELECTED ELEMENTS- ALL LKEY
  NUMBER OF HFLU SURFACE LOADS DELETED= 2204
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  END OF MOVING HEAT FLUX
  USE AUTOMATIC TIME STEPPING THIS LOAD STEP
  USE 20 SUBSTEPS INITIALLY THIS LOAD STEP FOR ALL DEGREES OF FREEDOM
  FOR AUTOMATIC TIME STEPPING:
  USE 100000000 SUBSTEPS AS A MAXIMUM
  USE 20 SUBSTEPS AS A MINIMUM
  INCLUDE TRANSIENT EFFECTS FOR ALL DEGREES OF FREEDOM THIS LOAD STEP
  TIME= 4.0000
  
  *********** Moving Heat Flux: Moving Heat Flux 2 ***********
  
  FINISH SOLUTION PROCESSING
  
  ***** ROUTINE COMPLETED ***** CP = 97.969
  
  *** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2023 R1 23.1 ***
  Ansys Mechanical Enterprise Academic Student
  01055371 VERSION=WINDOWS x64 14:15:36 JAN 26, 2023 CP= 97.969
  wbnew--Transient Thermal (A5)
  
  ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
  CMBLOCK read of NODE component FACE1 completed
  CMBLOCK read of NODE component PATH1 completed
  CMBLOCK read of NODE component START1 completed
  You have already entered the general preprocessor (PREP7).
  SELECT ALL ENTITIES OF TYPE= ALL AND BELOW
  PARAMETER INX = 1.000000000
  PARAMETER LSTP = 200.0000000
  *** ERROR *** CP = 97.969 TIME= 14:15:36
  Parameter LSTP needs subscripts.
  
  NUMBER OF WARNING MESSAGES ENCOUNTERED= 408
  NUMBER OF ERROR MESSAGES ENCOUNTERED= 1
  +--------------------- M A P D L S T A T I S T I C S ------------------------+
  Release: 2023 R1 Build: 23.1 Update: UP20221128 Platform: WINDOWS x64
  Date Run: 01/26/2023 Time: 14:15 Process ID: 6224
  Operating System: Windows 10 (Build: 19044)
  Processor Model: 12th Gen Intel(R) Core(TM) i7-12700H
  Compiler: Intel(R) Fortran Compiler Version 19.0.5 (Build: 20190815)
  Intel(R) C/C++ Compiler Version 19.0.5 (Build: 20190815)
  Intel(R) Math Kernel Library Version 2020.0.0 Product Build 20191125
  BLAS Library supplied by Intel(R) MKL
  Number of machines requested : 1
  Total number of cores available : 20
  Number of physical cores available : 14
  Number of processes requested : 4
  Number of threads per process requested : 1
  Total number of cores requested : 4 (Distributed Memory Parallel)
  MPI Type: INTELMPI
  MPI Version: Intel(R) MPI Library 2021.5 for Windows* OS
  
  GPU Acceleration: Not Requested
  Job Name: file0
  Input File: dummy.dat
  Core Machine Name Working Directory
  -----------------------------------------------------
  0 DESKTOP-KV8LMEO C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B
  1 DESKTOP-KV8LMEO C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B
  2 DESKTOP-KV8LMEO C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B
  3 DESKTOP-KV8LMEO C:\Users\candt\AppData\Local\Temp\WB_candt_12860_2\_ProjectScratch\ScrE60B
  
  Latency time from master to core 1 = 2.015 microseconds
  Latency time from master to core 2 = 3.645 microseconds
  Latency time from master to core 3 = 3.607 microseconds
  
  Communication speed from master to core 1 = 12660.23 MB/sec
  Communication speed from master to core 2 = 10193.81 MB/sec
  Communication speed from master to core 3 = 7956.56 MB/sec
  Total CPU time for main thread : 94.4 seconds
  Total CPU time summed for all threads : 98.0 seconds
  Elapsed time spent obtaining a license : 0.5 seconds
  Elapsed time spent pre-processing model (/PREP7) : 0.1 seconds
  Elapsed time spent solution - preprocessing : 18.2 seconds
  Elapsed time spent computing solution : 64.1 seconds
  Elapsed time spent solution - postprocessing : 3.5 seconds
  Elapsed time spent post-processing model (/POST1) : 0.0 seconds
  
  Equation solver used : Sparse (symmetric)
  Equation solver computational rate : 18.3 Gflops
  Sum of memory used on all processes : 768.0 MB
  Sum of memory allocated on all processes : 5184.0 MB
  Physical memory available : 16 GB
  Total amount of I/O written to disk : 1.8 GB
  Total amount of I/O read from disk : 1.0 GB
  +------------------ E N D M A P D L S T A T I S T I C S -------------------+
  
  *-----------------------------------------------------------------------------*
  | |
  | RUN COMPLETED |
  | |
  |-----------------------------------------------------------------------------|
  | |
  | Ansys MAPDL 2023 R1 Build 23.1 UP20221128 WINDOWS x64 |
  | |
  |-----------------------------------------------------------------------------|
  | |
  | Database Requested(-db) 1024 MB Scratch Memory Requested 1024 MB |
  | Max Database Used(Master) 63 MB Max Scratch Used(Master) 183 MB |
  | Max Database Used(Workers) 1 MB Max Scratch Used(Workers) 173 MB |
  | Sum Database Used(All) 66 MB Sum Scratch Used(All) 702 MB |
  | |
  |-----------------------------------------------------------------------------|
  | |
  | CP Time (sec) = 97.984 Time = 14:15:36 |
  | Elapsed Time (sec) = 98.000 Date = 01/26/2023 |
  | |
  *-----------------------------------------------------------------------------*
  
  All
- January 27, 2023 at 9:54 pm
  
  wrbulat
  Ansys Employee
  
  I can see from your solver output that you are using the moving heat ACT that can be downloaded from our customer portal:
  
  Ansys Store Moving Heat SourceV4.1 created by Ansys Inc
  
  It appears development of the ACT was discontinued (a note in the image above reads "Supports ANSYS: 17.0, 17.1 and 17,2") so there may be problems (some minor incompatibilities) when it is used at 2023R1. By the way, as a favor to us, when you have a question about usage of features that are not natively supported in the Mechanical GUI, it would be very helpful to us if you could tell us so. Doing so saves us a lot of time. Well, maybe you weren't even aware that this feature is essentially an add-on - if so, that's certainly not your fault.
  Anyway, when you download the moving heat ACT you get a document describing what it does and how to use it. In this document, I found the answer to your question about the spatial distribution of the moving heat source:
  
  Without investigating with a model of my own making, I can't say why the heat load appears to be moving on only one direction or what workaround there might be for making it double back on itself as you seem to want it to do.
  
  I noticed however that the output file reports a problem calling an array:
  *** ERROR *** CP = 97.969 TIME= 14:15:36
  Parameter LSTP needs subscripts.
  
  This is likely related to the ACT not behaving as you want it to. If you haven't reviewed the documentation that comes with the moving heat ACT, it would be a good idea to download it and see if it gives you any indication that something in your setup is inconsistent with the way the ACT is supposed to be used.
  
  Kind regards,
  Bill

Viewing 1 reply thread

The topic ‘Transient thermal simulation using moving heat source but only 1 data calculated’ is closed to new replies.

Fluids

Transient thermal simulation using moving heat source but only 1 data calculated

Ansys Assistant

Fluids

Transient thermal simulation using moving heat source but only 1 data calculated

Edit Discussion

Ansys Assistant

Welcome to Ansys Assistant!