student licensing error

- September 8, 2022 at 11:45 am
  
  r10543101
  Subscriber
  
  Hello
  When I use fluent in workbench
  Geometry and Mesh both work fine
  But in the Set step, it does not work properly
  The message in the Set console
  
  Welcome to ANSYS Fluent 2022 R2
  
  Copyright 1987-2022 ANSYS, Inc. All Rights Reserved.
  Unauthorized use, distribution or duplication is prohibited.
  This product is subject to U.S. laws governing export and re-export.
  For full Legal Notice, see documentation.
  
  Build Time: May 27 2022 08:52:29 EDT Build Id: 10212
  
  Connected License Server List:
  
  --------------------------------------------------------------
  This is a student version of ANSYS FLUENT. Usage of this product
  license is limited to the terms and conditions specified in your ANSYS
  license form, additional terms section.
  --------------------------------------------------------------
  Host spawning Node 0 on machine "LAPTOP-KN02JFQD" (win64).
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 0 PID 29344 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 1 PID 18396 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 2 PID 11968 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 3 PID 4568 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  When I turn back to the workbench
  It says" Fluent Application cannot be verified to connect"
  Why is this happening?
  I need to finish my master's thesis urgently
  Thank you..!
- September 8, 2022 at 12:34 pm
  
  George Karnos
  Ansys Employee
  
  Can you try turning off your firewall software to test if something is being blocked?
- September 9, 2022 at 10:45 am
  
  r10543101
  Subscriber
  
  Sorry, I try turning off my firewall .
  But it's still doesn't work.
- September 9, 2022 at 3:21 pm
  
  George Karnos
  Ansys Employee
  
  Is this a new installation, or did it work before?
  Do any errors exist int the install.log located under:
  C:\Program Files\ANSYS Inc\ANSYS Student
  Or, does an install.err exist? What is the contents?
- September 10, 2022 at 5:20 am
  
  r10543101
  Subscriber
  
  At the beginning of the download can be used, after using a month this happens.
  The following content is found in the folder:
  
  >>>--------------------------------------->
  ANSYS安装: 週四八月 25 12:21:12 2022
  版本: 2022 R2
  
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\framewrk\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\framewrk\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\cpythnew\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\cpythnew\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222\commonfiles"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\tp\IntelCompiler\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\tp\IntelCompiler\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\tp\intelmkl2021.3.0\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\tp\intelmkl2021.3.0\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluents\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluents\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluenta\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluenta\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluentp\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluentp\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  ###### Error #######
  Error extracting C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluent3ddp\WINX64.7z:
  '"C:\Users\QIU\AppData\Local\Temp\ans_install_tmp38464\7zip\7z.exe" x -aoa -bb1 "C:\Users\QIU\Downloads\ANSYSACADEMICSTUDENT_2022R2_WINX64\fluent3ddp\WINX64.7z" "-oC:\Program Files\ANSYS Inc\ANSYS Student\v222"' terminated after 1 attempts with the following error(s):
  Unknown error
  Exit Code: 2
  >>>--------------------------------------->
  
  Please take a look.
  Thank you.
- September 15, 2022 at 2:52 am
  
  r10543101
  Subscriber
  
  Sorry, is there a way to solve this?
- September 16, 2022 at 8:51 am
  
  r10543101
  Subscriber
  
  The following errors occurred
- June 19, 2023 at 7:04 am
  
  Ashagoni Nivas
  Subscriber
  
  Hello
  When I use fluent in workbench
  Geometry and Mesh both work fine
  But in the Set step, it does not work properly
  
  The message in the Set console
  
  Welcome to ANSYS Fluent 2022 R2
  
  Copyright 1987-2022 ANSYS, Inc. All Rights Reserved.
  Unauthorized use, distribution or duplication is prohibited.
  This product is subject to U.S. laws governing export and re-export.
  For full Legal Notice, see documentation.
  
  Build Time: May 27 2022 08:52:29 EDT Build Id: 10212
  
  Connected License Server List:
  
  --------------------------------------------------------------
  This is a student version of ANSYS FLUENT. Usage of this product
  license is limited to the terms and conditions specified in your ANSYS
  license form, additional terms section.
  --------------------------------------------------------------
  Host spawning Node 0 on machine "LAPTOP-KN02JFQD" (win64).
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 0 PID 29344 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 1 PID 18396 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 2 PID 11968 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  ===================================================================================
  = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
  = RANK 3 PID 4568 RUNNING AT LAPTOP-KN02JFQD
  = EXIT STATUS: -1073741515 (c0000135)
  ===================================================================================
  
  When I turn back to the workbench
  It says" Fluent Application cannot be verified to connect"
  Why is this happening?
  
  I need to finish my master's thesis urgently
  Thank you..!