Launching Transient Solver, process tdslink died unexpectedly. Please contact ANSYS technical suppor

- October 28, 2021 at 5:34 pm
  
  Kashish
  Subscriber
  
  I am running a simulation to calculate an efficiency map for a SRM motor. I made the model in RMxprt, exported to Maxwell 2d and then ran it. I am getting the following error.
- October 28, 2021 at 6:56 pm
  
  Kashish
  Subscriber
  
  There is some additional problem with the toolkit which I found out. I am using a 8/6 SRM. Even after using 4 phases option, I get 6 phases to be put as input and I am unable to change any option in phases setting or angles or field winding option.
- November 3, 2021 at 2:24 pm
  
  Navya C
  Ansys Employee
  
  Hi @Kashish Can you the screenshots of each page of the machine toolkit setup?
  Regards Navya
- November 4, 2021 at 2:33 pm
  
  Kashish
  Subscriber
  
  These are the steps and then I get these errors