Course Assessment - Introduction to Ansys Rocky DEM Couplings
Quiz Summary
0 of 12 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 12 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 12
1. Question
Which of the following is a common industrial application of DEM-CFD coupling?
CorrectIncorrect -
Question 2 of 12
2. Question
What is one of the main advantages of coupling DEM with CFD in simulations?
CorrectIncorrect -
Question 3 of 12
3. Question
How is the interaction between DEM particles and the CFD fluid phase handled in a 2-Way coupled simulation?
CorrectIncorrect -
Question 4 of 12
4. Question
For the 1-way Structural Coupling with the Mechanical, which loading condition analyses are supported by the coupling on the Mechanical side?
CorrectIncorrect -
Question 5 of 12
5. Question
For both 1-way Structural and Thermal Couplings, respectively, what are the Imported Load conditions that these couplings support from the Mechanical side?
CorrectIncorrect -
Question 6 of 12
6. Question
For the 2-way Structural and Thermal Coupling using System Coupling, which data are transferred between Rocky and Mechanical, respectively?
CorrectIncorrect -
Question 7 of 12
7. Question
What is the main advantage of coupling between Ansys Rocky software and Ansys Motion software?
CorrectIncorrect -
Question 8 of 12
8. Question
Which option should be selected when exporting an FMU for geometries that do not interact with particles in Ansys Rocky software?
CorrectIncorrect -
Question 9 of 12
9. Question
What Module needs to be activated in Ansys Rocky Software before importing an FMU file?
CorrectIncorrect -
Question 10 of 12
10. Question
What needs to be done in order to get the Rocky project ready for coupling with optiSLang software?
CorrectIncorrect -
Question 11 of 12
11. Question
In the Optimization Wizard | Criteria step, you can define:
CorrectIncorrect -
Question 12 of 12
12. Question
When setting up a coupled project in optiSLang software for optimization, you can define a range for ________________, and this will define a domain for the case you are studying.
CorrectIncorrect