Simulation Exercise - Geometry Representation
Download the zip file and extract the contents. Go through the Instructions file. Follow along with the provided steps and solve the model. You can start the quiz after you have obtained a solution.
For performing the simulation, you can use the latest release of the academic, commercial or free student version of Ansys Mechanical. Download Ansys Student for free here.
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Which TWO of the following options are correct regarding the midsurface Part B?
CorrectIncorrect -
Question 2 of 10
2. Question
When analyzing all the parts as solid bodies, which of the following approaches would minimize the modeling effort? Select the best option.
CorrectIncorrect -
Question 3 of 10
3. Question
Select 2 statements below which are TRUE.
CorrectIncorrect -
Question 4 of 10
4. Question
Assuming that the local x-direction for midsurface Part B is in the circumferential direction of the cylinder, what is the maximum tensile Membrane Stress in Local Element Direction 11, for Part B?
CorrectIncorrect -
Question 5 of 10
5. Question
Assuming that the local x-direction for Part B is in the circumferential direction of the cylinder, what is the maximum tensile Bending Stress in Local Element Direction 11, for Part B?
CorrectIncorrect -
Question 6 of 10
6. Question
Assuming that the local x-direction for Part B is in the circumferential direction of the cylinder, what is the maximum value of Normal Stress in the local z-direction, for Part B?
CorrectIncorrect -
Question 7 of 10
7. Question
Consider a hypothetical situation where we want to apply a pressure load to the outside of the hollow solid pipe as shown in the image. However, we represent the geometry of the pipe not as a solid body but as a surface body, and we need to apply the pressure in an equivalent manner. Select the 2 best options below that are correct.
CorrectIncorrect -
Question 8 of 10
8. Question
When a 3D solid body representation of a thin structure is replaced with an equivalent surface body, why does the direction of the applied pressure seem to be reversed in some cases? Select the best option.
CorrectIncorrect -
Question 9 of 10
9. Question
The element orientation matters for which of the following types of stresses? Select the two correct options.
CorrectIncorrect -
Question 10 of 10
10. Question
Which of the following statements is TRUE? Select the best option.
CorrectIncorrect