Ansys Workbench LS-DYNA Getting Started - Professional Certification

Format of the Certification Exam

• This certification exam consists of 1 Theory Quiz and 4 Simulation Quizzes. You will have two attempts to pass within 30 days of your purchase.
• The theory quiz is 1 hour (60 mins) in timed duration where you are presented with 45 questions which test your knowledge of the courses that belong to the learning track - Getting Started with Explicit Dynamics using Ansys Workbench LS-Dyna.
• The Simulation Quizzes are 15 mins each in timed duration where you are presented with 10 questions to answer. This quiz is designed to be taken after successfully solving the simulation exercises.
• The certification exam questions will include both single-answer and multiple-answer questions.
• You will have 30 days to complete the entire certification exam process, allowing for sufficient time to download the model, set up the workflow and solve the simulation exercise before starting the certification exam.
• You may start each quiz at your convenience (within 30 days), but once started, you must complete it; there is no option to pause and start again later.
• A passing grade of 75% is required for each of the theory and simulation quizzes.

Simulation Quiz Requirements and Details

• The Simulation Quizzes test your basic understanding of topics such as 'Ansys Workbench LS-DYNA Demonstration', 'Geometry Preparation', 'Loads and Boundary Conditions', 'Connections', 'Material Models', 'Meshing', 'Analysis Settings' and 'Results and Post-Processing' that belong to the learning track - Getting Started with Explicit Dynamics using Ansys Workbench LS-Dyna.
• You will be provided with a starting geometry file or an existing mesh file and some basic instructions for solving the simulation exercises. Note: You will need Ansys Mechanical 2022 R2 to load the provided files.
• The simulation models have been designed to run within the limits of the free Ansys Student product, found here. Alternatively, you may use a standard commercial or academic license of Ansys Mechanical software if you already have access to one through school or work. 
• The files may not open in older releases of Ansys software, so attempting to setup and solve the simulation with older releases might not be possible.
• Before proceeding with the certification exam, you should confirm that you can set up, solve and post-process any model inside Ansys Mechanical, hence confirming your ability to run the software.
• Starting the simulation-based quiz without access to Ansys Mechanical software will result in a failed certification exam.
• As a guide, the actual setup and solving of the simulation should not take longer than 2 hours per simulation, but you have 30 days to complete this along with the certification exam itself.
• If you do not pass the certification exam, you will be permitted to retry one additional time (i.e., 2 attempts in total) within 30 days from the time you purchased the certification exam.

You are being redirected to a partner website to provide you with an optimal buying experience. Please note that these certifications are available for purchase only in India, US, Canada, Singapore, Thailand, Indonesia, Malaysia, Vietnam, Philippines, Mexico, Italy, Spain, Portugal, UK, France, Germany, Switzerland, Austria and Ireland. Click on FAQ page for more details.
Your purchase is pursuant to the partner's Privacy Notice Privacy Policy - CADFEM AIC Marketplace and Terms of Use Terms of Use - CADFEM AIC Marketplace, but your usage of the purchased product is governed by the Ansys Inc. Privacy Notice Privacy Notice: Information Usage and Safety | Ansys and the applicable Terms & Conditions Terms and Conditions - CADFEM AIC Marketplace. Click “Continue” below to proceed further.