1) STL Selection with SpaceClaim

Learn how to apply standard selection techniques to Meshes and STL files, an learn some techniques and tips that are specific to mesh/STL files.

Download File

2) Orienting STL Mesh in SpaceClaim

This video demonstrates how to orient a scan/mesh/STL to world origin. It shows a couple of different ways to orient the mesh. Some of the tools have moved to the Tools Tab Reverse Engineering

Download File

3) Building Solids with STL Files in SpaceClaim

This video demonstrates the basics of model creation in the context of an STL file. It shows manual sketching method, which often results in the cleanest geometry.

Download File

4) Advanced Patching & Options in SpaceClaim – Part 1

This video demonstrates some advanced patching techniques using the Skin Surface tool. It shows how to join up different types of patches, and take a deep look into the options associated with the tool. (Part 1 of 2)

Download File

5) Advanced Patching & Options in SpaceClaim – Part 2

This video demonstrates some advanced patching techniques using the Skin Surface tool. It shows how to join up different types of patches, and take a deep look into the options associated with the tool. (Part 2 of 2)

Download File

6) Build a Solid by Extracting Curves from a Scan STL – Part 1

This video demonstrates how to construct a model from a scanned surfboard. Instead of manually sketching over the scan, you will extract curves from the scan and them blend to create the more organic model. (Part 1 of 2)

Download File

7) Build a Solid by Extracting Curves from a Scan STL – Part 2

This video demonstrates how to construct a model from a scanned surfboard. Instead of manually sketching over the scan, you will extract curves from the scan and them blend to create the more organic model. (Part 2 of 2)

Download File

8) Creating Boundary Patches from STL in SpaceClaim

This video demonstrates how to use the Skin Surface tool to wrap spline surfaces onto an STL, OBJ or other importable mesh files. It focuses on the boundary patch method.

Download File

9) Creating Periodic Blended Patches from STL in SpaceClaim

This video demonstrates how to use the Skin Surface tool to create blended spline surfaces onto an STL, OBJ or other importable mesh files. It focuses on the periodic patch method, which creates surfaces between closes boundaries around the circumference of a section of an STL.

Download File