When used with the ANSYS Optimetrics module, ANSYS Maxwell can perform automated simulations by varying simulation parameters. Parametric sweeps are often used to gain an understanding of the performance of the design by making small changes and observing the results. By default, computed fields are not saved for every individual solution in a parametric sweep. This document explains how to modify the settings in order to save the field quantities during the parametric analysis and then how to display the saved fields after the analysis has been completed. Keywords: Maxwell, Electronics Design Desktop, Parameters, Parametric, Sweep, Fields, Save, Variables, HFSS, Q3D

Attachments:
1. EM_FAQ_Maxwell_FieldQuantitiesOptimetrics.pdf