General

General

  1. All Categories
  2. Fluids - General
  3. How to work with large tip gaps in Turbogrid and fix the error: Last blade profile is not defined as a shroud tip and is too far (x of span) from the shroud for reliable intersection. Must be at least 0.88 of span.

How to work with large tip gaps in Turbogrid and fix the error: Last blade profile is not defined as a shroud tip and is too far (x of span) from the shroud for reliable intersection. Must be at least 0.88 of span.

Tagged: 18, CFX-TurboGrid, fluid-dynamics, General
    • April 13, 2023 at 7:32 am
      SolutionSolution
      Participant

      When defining blade geometries where the tip gap is very large, issues can occur where TurboGrid cannot generate the blade. The attached document shows a generic example of a blade with large tip clearance and the error TurboGrid generates, and the solution using Surface Extension Factor.

      Attachments:
      1. 2050448.pdf

Featured Articles

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

© 2024 Copyright ANSYS, Inc. All rights reserved.