General

General

  1. All Categories
  2. Fluids - General
  3. An MFX run fails at the start of the 1st coefficient loop, but after mesh, boundary scale, and wall scale. How can this error be resolved? Slave: 3 Slave: 3 Details of error:- Slave: 3 —————- Slave: 3 Error detected by routine PEEKCS Slave: 3 CDANAM = BCP1 /NOVARIABLES/PHYTYPE Slave: 3 CRESLT = NONE Slave: 3 Slave: 3 Current Directory : /FLOW/BOUNDCON/ZN1 Parallel run: Received message from slave —————————————– Slave partition : 3 Slave routine : ErrAction Master location : Message Handler Message label : 001100279 Message follows below – :

An MFX run fails at the start of the 1st coefficient loop, but after mesh, boundary scale, and wall scale. How can this error be resolved? Slave: 3 Slave: 3 Details of error:- Slave: 3 —————- Slave: 3 Error detected by routine PEEKCS Slave: 3 CDANAM = BCP1 /NOVARIABLES/PHYTYPE Slave: 3 CRESLT = NONE Slave: 3 Slave: 3 Current Directory : /FLOW/BOUNDCON/ZN1 Parallel run: Received message from slave —————————————– Slave partition : 3 Slave routine : ErrAction Master location : Message Handler Message label : 001100279 Message follows below – :

Tagged: 19.2, cfx, cfx-solver, fluid-dynamics, General - CFX
    • April 5, 2023 at 2:32 pm
      FAQFAQ
      Participant

      This is an error that was fixed in version 19.2. The workaround for previous versions is to change the mesh motion option ‘Displacement Relative To = Previous Mesh’. The Initial Mesh option which this case originally used has a problem with non-overlap fluid-structure interfaces.

Featured Articles

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

© 2024 Copyright ANSYS, Inc. All rights reserved.