We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General

General

How to fix convergence issues when using the pressure-based coupled solver for compressible flow through a porous medium?

    • FAQFAQ
      Participant

      This is a general limitation of this solver with strong body forces in a very limited region. It is documented for porous jump boundary conditions but also applies to porous zones with a high resistance. Typically, the convergence behavior is completely independent of all solver settings, the residuals stall at a very high level and the results can be unphysical. The only solution is to use the pressure-based solver with a different scheme than coupled, e.g. SIMPLE (depending on the specific problem). Compare with chapters “6.3.20. Porous Jump Boundary Conditions” and “29.3.1.4. Coupled” in the ANSYS Fluent 18.0 User’s Guide. Keywords: ideal gas; compressible; coupled; segregated; residual; residuals; convergence; porous zone; porous medium