Learning Forum

[Prathmeshsanas2]

Hii sir,

I made a mesh of 17000 nodes and 70000 elements and  also do the mesh numbering but still get this errors.

plz solve this problem

[Rahul Kumar]

Hello,

Can you please insert an image of the mesh and mesh details so that we can get a better idea? 

[Prathmeshsanas2]

mesh details :

Element size 4 mm

linear , growth rate 1.3, defeature size 0.004

 

[Keyur Kanade]

student version has limitations. please check at 

https://www.ansys.com/en-in/academic/free-student-products?utm_source=studentcommunity&utm_campaign=studentcommunity&utm_content=Studentproduct&utm_source=studentcommunity&utm_campaign=studentcommunity&utm_content=Studentproduct

 

[Prathmeshsanas2]

I checked it and it was within the limits. Still don't get an answer.

[peteroznewman]

Try using Mesh Renumbering.

Also note that any contact elements are created at the solution time, so they don't show up in the mesh statistics but they do count to the limit.

Does your original post contain an error in the element count?  You said 70,000 elements, which is over the 32,000 element limit. But maybe you meant 7,000 elements. Please clarify.

 

 

[Prathmeshsanas2]

i get a solution with an increasing growth rate such that no. of elements is shown within the range but when i add moment on it , shows an error like your product licence are within limit..........

plz solve this problem.