-
-
July 5, 2024 at 1:06 pmwang naSubscriber
老师您好,我用FDTD仿真了表面直径400nm的psl颗粒散射场,然后使用显微成像脚本计算加入NA的图像,光源入射角为45°。光源波长为400nm-700nm时,离焦光斑只有一半,但是光源波长设置为405nm时又不是这样,请问这是什么原因造成的?光源入射角固定扫描波长后离焦光斑也是只有一半。
-
July 8, 2024 at 5:57 pm
-
Viewing 1 reply thread
- The topic ‘显微成像离焦问题’ is closed to new replies.
Ansys Innovation Space
Trending discussions
Top Contributors
-
1301
-
591
-
544
-
524
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.