We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Preprocessing

Preprocessing

Topics related to geometry, meshing, and CAD.
  1. All Channels
  2. Preprocessing
  3. Workbench has Crashed

Workbench has Crashed

    • July 25, 2024 at 3:35 pm
      saiadhityarohith2002
      Subscriber

      Hi everyone
               I facing some issue. during the simulation, its show like "workbench has crashed". so please help how to rectify the problem.

       

    • July 26, 2024 at 10:24 am
      Aniket
      Forum Moderator

      does this happen with smaller model as well? Try small cube and see if you can reproduce?

      -Aniket

      Forum Rules & Guidelines

    • July 30, 2024 at 4:40 am
      saiadhityarohith2002
      Subscriber

      Yes, I only tried it with the small plate model; the shared error image above is for this model.

       

    • July 31, 2024 at 5:27 am
      Aniket
      Forum Moderator

      Thanks, does your machine qualify the following requirements:

      Also try updating your graphics drivers, or try with any other machine.

      -Aniket

      Forum Rules & Guidelines

    • August 1, 2024 at 3:57 am
      saiadhityarohith2002
      Subscriber

      Oh oK,

      Thanks for replying sir

Viewing 4 reply threads
  • The topic ‘Workbench has Crashed’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.