-
-
April 29, 2024 at 7:42 am
yjg298
SubscriberHi, everyone.
I am studying about the natural frequency analysis for any pump. I found that there is a difference between having fluid inside the pump and not having fluid inside. I want to know about Wet condition. Please help me.
-
April 29, 2024 at 8:16 am
Erik Kostson
Ansys EmployeeHello
This is often called the fluid added mass effect.
Search for more info:
All the best
Erik
-
Viewing 1 reply thread
- The topic ‘Wet condition’ is closed to new replies.
Innovation Space
Trending discussions
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- Meaning of the error
- How to model a bimodular material in Mechanical
- Simulate a fan on the end of shaft
- Real Life Example of a non-symmetric eigenvalue problem
- Nonlinear load cases combinations
- How can the results of Pressures and Motions for all elements be obtained?
- Contact stiffness too big
Top Contributors
-
4167
-
1487
-
1338
-
1188
-
1021
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.