-
-
May 29, 2024 at 3:34 pm
Tenyu Aikawa
SubscriberHi all I was just wondering if there was a way to animate the E-field in the time domain for metamaterials. With metamaterials I have to use floquet ports and periodic boundary conditions. To the best of my knowledge I believe we have to use a transient solution to view how the E-field evolves with time. However with transient solutions it does not allow for periodic boundary conditions or floquet ports. So I'm not sure how this can be done.
-
June 3, 2024 at 3:22 pm
Aymen Mzoughi
Ansys EmployeeThis is not doable
-
Viewing 1 reply thread
- The topic ‘View the fields in the time domain for metamaterials?’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3882
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.