General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Variable Thickness generation

Variable Thickness generation

TAGGED: , , , ,

    • July 22, 2021 at 12:17 pm
      Amith_Anoop_Kumar
      Subscriber
      image.png
    • July 22, 2021 at 12:23 pm
      Amith_Anoop_Kumar
      Subscriber
      The following is what I want to achieve
    • July 22, 2021 at 12:51 pm
      Erik Kostson
      Ansys Employee


      It should work as shown below (2021 R2) - the only difference is the scoping which is body in my case:


    • July 22, 2021 at 1:03 pm
      Amith_Anoop_Kumar
      Subscriber
      Sir I even tried with scoping as body its still not working
    • July 22, 2021 at 1:36 pm
      Erik Kostson
      Ansys Employee

      Which version are u using (2021 R1)?
    • July 22, 2021 at 1:57 pm
      Amith_Anoop_Kumar
      Subscriber
      2021 R1
    • July 22, 2021 at 2:01 pm
      Erik Kostson
      Ansys Employee
      No idea - it works for me in 2021 R1 also - I am afraid I do not know why this is - I would suggest to start from scratch and do another example. Perhaps it will help. Best of luck

      Erik
Viewing 6 reply threads
  • The topic ‘Variable Thickness generation’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.