We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. User defined support condition

User defined support condition

TAGGED: , , ,

    • January 25, 2024 at 4:45 pm
      R421
      Subscriber

      "I'm working with an ANSYS shell model and need assistance with constraints. Is it possible to apply a constraint in the +y direction while allowing release in the -y direction? Additionally, is there a way to incorporate a friction coefficient in this setup? Any guidance on achieving this in ANSYS would be greatly appreciated."

    • January 29, 2024 at 4:09 pm
      dlooman
      Ansys Employee

      No.  You need to support the shell with nonlinear contact to constrain it only in one direction.  In Workbench/Mechanical, this is referred to as a compression only constraint.

Viewing 1 reply thread
  • The topic ‘User defined support condition’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.