UDF for calculating the phase fraction based volume

- July 8, 2024 at 5:03 pm
  
  vipul.gupta
  Subscriber
  
  Hi
  I am working on multiphase modeling using VOF. I need to calculate the total volume of cells where the secondary phase volume fraction ranges from 0.5 to 1. For that, I made the below UDF. But on running the simulation it fails with error. Please help me to identify the issue with UDF.
- July 9, 2024 at 11:11 am
  
  Rob
  Forum Moderator
  
  If you're using VOF which implies most of the cells should be one phase or the other can you not use a volume integral report?