Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Transient simulation

Transient simulation

    • October 8, 2020 at 8:31 pm
      nastyashustic
      Subscriber

      Hello!

      Tell me please, how to make a transient analysis of structural vibration?

      I need a deformation of construction during 1 second.

      And I have pressure from External loads, I have done a Modal analysis, and the lowest frequency is a 200 Hz.

      Then I try to do a simulation, it takes a very long time.

      image.png
    • October 9, 2020 at 2:32 am
      peteroznewman
      Subscriber
      Transient simulations do take a long time. There are ways to speed them up if the model is linear. That means that the deflections are small and the materials are all linear.nDo some research into Modal Superposition Transient Structural analysis (MSUP).nPlease describe in detail the time history of the Nodal Pressure load.n
Viewing 1 reply thread
  • The topic ‘Transient simulation’ is closed to new replies.
Innovation Space
Top Contributors

© 2026 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
[bingo_chatbox]