Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Topology optimization with customized constraints

Topology optimization with customized constraints

TAGGED: 
    • January 18, 2022 at 9:02 am
      iseetoh
      Subscriber

      Hi,

      I am trying to perform optimization with the following:

      Objective: Minimize compliance

      Constraint1: Volume (constant, 50%)

      Constraint2: Reaction force < F1

      where instead of F1 being a constant, it is a reaction force from another surface elsewhere in the geometry that is being optimized.

      Appreciate if anyone can offer advice on how to do it. Thanks!

    • January 18, 2022 at 12:37 pm
      peteroznewman
      Subscriber
      Please reply and insert an image of the geometry and show where the Reaction Force and F1 are being measured.
Viewing 1 reply thread
  • The topic ‘Topology optimization with customized constraints’ is closed to new replies.
Innovation Space
Top Contributors

© 2026 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
[bingo_chatbox]