Preprocessing

Preprocessing

Topics related to geometry, meshing, and CAD.
  1. All Channels
  2. Preprocessing
  3. To create multiple rounded corners using Ctrl

To create multiple rounded corners using Ctrl

TAGGED: ,

    • January 14, 2025 at 11:00 am
      tanmay.singhal
      Subscriber

      I have followed the  youtube video and Spaceclaim official post to create multiple rounded corner. 

      I have the issues of not getting the desired multiple rounded corner with the ctrl+click strategy.

      Please let me know if i am missing something. There is a similar comment on the youtube video.

      Spaceclaim 2024 R2

    • January 14, 2025 at 11:59 am
      Rob
      Forum Moderator

      It should work, can you check the rounds aren't clashing, or that creating one doesn't prevent another operation. 

    • January 14, 2025 at 12:22 pm
      tanmay.singhal
      Subscriber

      youtube video link , I have followed exactly as per this.

      May be I am missing some point.

    • January 14, 2025 at 12:27 pm
      Rob
      Forum Moderator

      Possibly, but answering my question may help with that. 

Viewing 3 reply threads
  • You must be logged in to reply to this topic.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.