We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
LS Dyna

LS Dyna

Topics related to LS-DYNA, Autodyn, Explicit STR and more.
  1. All Channels
  2. LS Dyna
  3. TIEBREAK

TIEBREAK

TAGGED: ,

    • May 31, 2024 at 12:55 pm
      2198215399
      Subscriber

      Hello, can you tell me which parameter in the tiebreak contact in LSDYNA mainly controls the strength of the bond?

    • June 3, 2024 at 4:52 pm
      igandiko
      Ansys Employee

      Hello, please see LS-DYNA users manual for the tiebreak failure options and control parameters. For option 6, you can use PARAM to define a relative displacement over which the bond strength goes from peak to zero (failure). 

Viewing 1 reply thread
  • The topic ‘TIEBREAK’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.