Kampus Merdeka Belajar

Kampus Merdeka Belajar

Ask questions related to general and focused sessions.
  1. All Channels
  2. Kampus Merdeka Belajar
  3. The solver engine was unable to converge on a solution for the nonlinear problem

The solver engine was unable to converge on a solution for the nonlinear problem

    • November 4, 2023 at 4:31 pm
      Arif Suersa
      Subscriber

      Hello, I am having problems when "evaluating" because it is limited to something I don't know yet, please provide a solution to solve the problem.

    • November 5, 2023 at 10:50 pm
      Raihan Lutfianto
      Subscriber

      Hi Arif. In case the same error happens in the future. Please check for nonlinearities in your model (contact, material, and large deformation). Also, make sure you have set the auto time stepping to ON and set appropriate substeps.

Viewing 1 reply thread
  • The topic ‘The solver engine was unable to converge on a solution for the nonlinear problem’ is closed to new replies.
Ansys Innovation Space

© 2024 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.