3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. The internal flow simulation does not recognize the bodys

The internal flow simulation does not recognize the bodys

TAGGED: 
    • February 4, 2021 at 5:21 pm
      igormaia
      Subscriber
      For this analysis, I've used an assembly in SolidWoks, exported as .STEP214, .ACIS and .IGES. However, in all of them, the air flow does not consider the other bodys in the original assembly, just the external case. What can I do to make all the parts of the assembly available in the simulation?
    • February 5, 2021 at 4:27 am
      Charudatta Bandgar
      Subscriber

      Hello Igor Ribeiro

      Which discovery product are you using?

      Regards.

      • February 5, 2021 at 2:59 pm
        igormaia
        Subscriber

        Charudatta Bandgar I'm using Ansys Discovery Live 2020 R2

    • February 9, 2021 at 5:33 am
      Charudatta Bandgar
      Subscriber
      Discussion is continued in the recent post on the same topic.
Viewing 2 reply threads
  • The topic ‘The internal flow simulation does not recognize the bodys’ is closed to new replies.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.