3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. The difference between Mechanical and Disco mode analysis results.

The difference between Mechanical and Disco mode analysis results.

TAGGED: ,

    • November 29, 2021 at 4:09 am
      Jang
      Subscriber
      The difference between Mechanical and Disco mode analysis results. If Remote Mass is included in the mode analysis in Disco, As shown in the picture below, the accuracy tends to be poor. (Compared to the Ansys Mechanical Results) If you let me know your email address in the comments, I will send you the file. Please review it. Thank you.
    • November 29, 2021 at 4:26 am
      Subashni Ravichandran
      Forum Moderator

      Hello Jang

      Can you please specify if you are using the Explore mode or Refine mode in Discovery?
      You can share the files at ansys-discovery-support@ansys.com

      • November 29, 2021 at 4:31 am
        Jang
        Subscriber

        Hello Subashni 

        Discovery is in Explore mode.

        I am attaching the file by e-mail.
        Please review it.

        Thank you.

    • November 29, 2021 at 4:37 am
      Subashni Ravichandran
      Forum Moderator

      Hello Jang

      Thanks for sharing the files. Let me look into them and get back to you.

Viewing 2 reply threads
  • The topic ‘The difference between Mechanical and Disco mode analysis results.’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.