We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Temperature variation in the final result for steady thermal

Temperature variation in the final result for steady thermal

    • October 2, 2024 at 7:39 am
      maulikkumarchaudhary21
      Subscriber

      Howdy, I am facing an issue related to the temperature legend in ansys mechanical ( steady state thermal ) analysis. As you can see the temp.. variation is from 251 to 197 but the ambient is at 30 degrees so how do I get the temp variation from 251 to 30??

    • October 2, 2024 at 7:45 am
      Erik Kostson
      Ansys Employee

       

      Hi

      The convection/thermal loss is probably not ‘strong’ enough – something to try to test that is to increase the convection coef., to see if it gets closer to 30 deg. Cel., which I suppose is the ambient temp., for the convection.

      All the best

      Erik

       

       

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.