We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Space Claim named groups not transferring to Fluent meshing

Space Claim named groups not transferring to Fluent meshing

    • March 4, 2024 at 11:14 pm
      Andrew Hayes
      Subscriber

      I have an enclosure around a block for some aero studies, but only one of my named sections is coming through.  My inlet and outlet do not make it, which creates a problem for analysis.

      Ive checked the preferences in SC.  I can't figure out what to do.  Any help is appreciated.  I am basically following the Ansys tutorial for the aerodynamic of a solar car.

    • March 5, 2024 at 2:19 pm
      CFD_Friend
      Ansys Employee

      Hi Andrew,

      Were the named selections given before transferring them to Fluent Meshing? 

    • March 5, 2024 at 4:00 pm
      Andrew Hayes
      Subscriber

      Yes, they were done in SpaceClaim.  They just disappear when I bring them into Fluent

    • March 5, 2024 at 4:53 pm
      Andrew Hayes
      Subscriber

      I am also using the 'water tight' option.  I might try the other option and see what happens

       

    • March 7, 2024 at 4:37 pm
      Andrew Hayes
      Subscriber

      I can get the named sections to work if I use WorkBench 18.2, but then it doesn't mesh in fluent..f***

Viewing 4 reply threads
  • The topic ‘Space Claim named groups not transferring to Fluent meshing’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.