We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Showing Normal Stresses with LCS Issue

Showing Normal Stresses with LCS Issue

    • November 20, 2023 at 11:11 am
      josh dudman
      Subscriber

      Hi, I want to view normal stresses in a direction other than the GCS but if I create an LCS and try to use that to define the direction in the normal stress details window it is yellowed out. Can anyone help?

    • November 20, 2023 at 2:08 pm
      josh dudman
      Subscriber

       

      I managed to answer my question. It was on an assembly with 3D and 2D geometry and when the default all bodies was selected the LCS was yellowed out. But when I scoped to just the 3D bodies it worked fine.

       

Viewing 1 reply thread
  • The topic ‘Showing Normal Stresses with LCS Issue’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.