-
-
November 19, 2024 at 9:20 amabankusomariSubscriber
please which of the epoxy resin in ansys maxwell material selection will be suitable for forming a modulator
-
December 5, 2024 at 10:53 amTamami YamanakaAnsys Employee
Hello,
The Electronics Desktop material library has only a few epoxy resin materials (e.g. modified_epoxy).
The Granta Materials Data for Simulation is provided as an extension option, you can choose from a variety of epoxy resins.
Ansys Granta Material Properties Database for SimulationIn addition, magnetic solvers such as Transient handle only magnetic properties, non-magnetic dielectrics are equivalent to air, and modeling can be omitted.
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- HFSS Incident Plane Wave excitement mode
- Simulation of capacitor combining eddy currents with displacement currents
- How to calculate eddy and hysteresis losses of the core?
- Ansys Maxwell 3D – eddy current
- How to determine initial position in motion setup
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Parametrizing coil “terminals” with coil geometry
- On-chip inductor design
- Maxwell circuit – PWM
Top Contributors
-
1406
-
599
-
591
-
555
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.