Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. rom model

rom model

    • August 29, 2019 at 7:58 pm
      Fabricio1
      Subscriber

      Can i use a rom model witn ansys cfx? My 19.2 ansys student version does not open the fluent software

    • August 30, 2019 at 8:10 am
      DrAmine
      Ansys Employee

      No.

    • July 12, 2023 at 9:48 am
      Safwan Lemadre
      Subscriber

      Hello, is it possible now with new releases ? Or is it possible to avoid the restriction by using CFX parameters as inputs with Thermical / Structural Analysis in order to display CFX outputs parameters with Static / Dynamic ROMs ?

    • July 12, 2023 at 11:20 am
      Rob
      Forum Moderator

      You can create response surfaces in Workbench using parameters (in CFX) and turn those into ROMs. 

    • July 12, 2023 at 11:24 am
      Safwan Lemadre
      Subscriber

      Thanks for your Answer. Is it possible without ROM builder, by using Ansys Twin Builder ROM building ?

    • July 12, 2023 at 12:18 pm
      Rob
      Forum Moderator

      If Twin Builder will take the response surface. That may need a little tinkering, I'm not sure. 

Viewing 5 reply threads
  • The topic ‘rom model’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.