-
-
September 22, 2023 at 9:50 amXINGLONG WUSubscriber
Dear ANSYS experts,
Several months ago I posted a question/potential issue in the forum (see the link below) and then I provided detailed information as required.
/forum/forums/topic/dipole-simulation-with-hfss/
However, several months passed and up to now I haven't received any further replies.
If it is possible, can you provide us further suggestions? I would be also available to share the project if you provide a space to upload it.
Many thanks.
Best regards,
Xinglong
Â
-
September 27, 2023 at 3:19 pmPraneethForum Moderator
Hi Xinglong,
Thank you for reaching out to the Ansys learning forum and sending a reminder for not getting back to the reply in time.
Please note that a reply is provided to the mentioned post. Kindly use the same post for further replies.Â
I am closing this post to avoid replies.
Best regards,
Praneeth.
-
- The topic ‘Reminder: dipole simulation issue with hfss’ is closed to new replies.
- HFSS Incident Plane Wave excitement mode
- Ansys Maxwell 3D – eddy current
- How to calculate eddy and hysteresis losses of the core?
- Simulation of capacitor combining eddy currents with displacement currents
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Parametrizing coil “terminals” with coil geometry
- Maxwell circuit – PWM
- On-chip inductor design
- Calculating E-field tangential to a 2D resonant structure on a sapphire chip
-
1762
-
635
-
599
-
591
-
366
© 2025 Copyright ANSYS, Inc. All rights reserved.