General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Reinforced Concrete SOLID65 with new Reinforcement model

Reinforced Concrete SOLID65 with new Reinforcement model

TAGGED: , ,

    • November 30, 2022 at 2:19 pm
      Oliver Thomsen
      Subscriber

      Hi

      Is it possible to create a reinforced concrete model using the SOLID65 element for the concrete and the embedded reinforcement (automatic) model type for reinforcement?

      My aim is to investigate both plastic behavior and cracking / crushing :)

      Best regards

      Oliver

    • November 30, 2022 at 4:10 pm
      Erik Kostson
      Ansys Employee

      Hi

       

      That will not work (using soild65) - see reinf264/265 for the allowed base elements (e.g., solid185/186, etc but not of course solid65).

       

      All the best

       

      Erik

    • December 1, 2022 at 10:14 am
      Oliver Thomsen
      Subscriber

      Thank you for the fast reply!

      This helped me saving unnecessary programming time

       

      Best regards

      Oliver

Viewing 2 reply threads
  • The topic ‘Reinforced Concrete SOLID65 with new Reinforcement model’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.