Reduce mesh size for maxwell 3d simulation?

- September 3, 2021 at 1:06 am
  
  golf32
  Subscriber
  
  I'm learning how to do simulations with maxwell 3d. I have the electronics desktop student, which has a limit to the mesh size. How do I reduce the number of volume elements in my simulation? I've reduced the mesh setting to it's coarsest, but it is still not enough.
- September 3, 2021 at 10:58 am
  
  NKC
  Forum Moderator
  
  You can Right-click on the mesh in the project manager window and got to initial mesh settings and move the slider to left.
  Reduce the number of passes in the analysis setup.
  Regards Navya