TAGGED: topology-optimization
-
-
March 18, 2025 at 6:03 pm
pxk247
SubscriberI am trying to perform a topology optimisation simulation on an F1 Rear wing. I have assigned fixed supports with a protected depth to areas with share interfaces with bodies that have been hidden as they are not being optimised. They need to be fixed in order to still maintain contact with the neighbouring surface, in this case the main wing, however although I can see the region which has been assigned as protected (red region) the software has still optimised the area and gotten rid of volume in that area.
-
March 24, 2025 at 9:18 am
-
March 24, 2025 at 10:50 am
pxk247
SubscriberHi, yes I am.Â
-
March 26, 2025 at 9:01 am
Devendra Badgujar
Forum Moderator
-
Viewing 3 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Adjoint Method for Optimising Diodicity of Tesla Valve
- Response constraint not allowing structural optimization to solve.
- ACP-pre Parameters: Ply Material issue
- The trouble-shooting that using python to control HFSS
- Protected Depth Topology Optimisation
- Harmonic Frequency respons into signal processing
- Fluent Editor Error
- how to get stress at a node and put it in a parameter for use with optimization
- Add Parameter so existing set
- optislang tutorial: damped oscillator calibration
Top Contributors
-
2773
-
965
-
841
-
599
-
591
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.